Interested to Buy Any Domain ? << Click Here >> for more details...
what is called star connection and delta connection also
purpose of this connections?
- 3 Answers
- 10862 Views
- Siemens, I also Faced
- E-Mail Answers
Answer Posted / vamsi krishna
Star and Delta Connections are more importantly give
priority in electrical studies as they are the key
techniques to transmit, distribute and supply power. As the
power developed is in poly phase(mostly 3-ph), the Delta
connections are used to Transmit power in Bulk amount from
remote station and Star connection is used to distribute the
transmitted power as it has got neutral in it.
In poly phase System, Star-delta conversions are done so
that transmission and distribution is made possible with
less losses and more power viz Pdelta= 3 X Pstar.
Similar way losses are 3times in star than delta.
Seeing from harmonics point, both have their own imperatives.
| Is This Answer Correct ? | 2 Yes | 2 No |
Post New Answer View All Answers
To make a basic instrumentation amplifier, it takes A One op-amp with a certain feedback arrangement B Two op-amp and seven resistors C Three op-amps and seven capacitors D Three op-amps and seven resistors
How to select HT/MV cable size ?
what is the use of piston rings in the engine used for a generator...........
am commissioning the trafo without connecting the neutral therefore unbalance will occur what is the alternative solution for this?
1)what is the function of a frequency inverter? 2)If a few frequency inverter are connected onto a device network,what are the two setting that will ensure the frequency inverter work properly on the network. 3)whats is the name of the input sensor for weigher? 4)How to confirm that the load cellis faulty? 5)Describe briefly the steps to validate that the weigher is working properly? 6)Describe the procedure to validate the flowmeter accuracy? 7)Describe briefly the steps to validate that the tempreture sensor/transformer is working properly. 8)what is the adjustment that need to be done when you are calibrating the temperature transmitter ? 9)what are the safety measures to be taken before disconnecting motor for rewinding. 10)whats is the synchronous speed in rpm of typical 4pole 50hz motor? 11)whats is the formula for kw, ohm's law 12)if a 3phase motor is rated 3kw,415vac,what is it's rated ampere?
what is PDU in transformer?? which company manufacture??
please describe the Transformer setting, Motor setting, I/C setting, Tie setting
along with technical test papers
how i calculate the syncrones generator NGR resistance .if we have a 6mw generator line voltage of generator 11kv also line current 393.3 ampere.
A commercial Building is designed with 14th floor levels with indoor substation of three phase transformer with rated capacity of 1000 Kva.The transformer delivered 65% of its rated capacity at 0.67 power factor lagging.Because of low power factor, the power customer was penalized and certain cost was charged accordingly based on every point percentage lower than 85%.This situation may repeatedly happen on the succeding energy bills of power customer.The power customer is desired to improve its historical power factor of 0.67 lagging and no further penalty be impose by the local power company on the next bill. Q: Identify the appropriate solution you want to offer to Client?.Justify SCIENTIFICALLY and MATHEMATICALLY the principles behind the solution.
wat is the first thing dat is needed, 2 lay a cable in some area??
What are the different types of LT Cables?
How much ph is maintained of water electrolyte which is used in LRS for 1200 kw slipring induction motor ?
What are the protections for safe running of electric generator?
What is lc oscillator?
