Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / srinivas
1 gm in 100 ml is 1% Solution
1 gm = 1000 mg
1 mg = 1000 ppm
1% Solution = 1000000 ppm
| Is This Answer Correct ? | 40 Yes | 137 No |
Post New Answer View All Answers
Why a1% value is used for some product ? What is the criteria for selection a1% value ?
which are the diffrent batches in the pharmaceuticals?
What is the principle of Thermal conductivity detector and FID?
Why we used in n-butyl acetate water content terminology while in ethyl acetate we used moisture content terminology?
What is split ratio in Gc? Splitless? how requirr to select?
UV and PDA detector, which have less signal to noise ratio?
how you establish the LOQ?
What should be the level/ Percentage of Arsenic in Arsenic free zinc.
I have compare C2H2-air and C2H2-N2O flame AAS on determination calcium. Both use same range of std to plot calibration curve. (2-6ppm) When i measure the sample with phosphate, KCl and LaCl, C2H2-N2O flame give false positive result, around 0.5ppm. When i measure the sample with phosphste, KCl and EDTA. C2H2-N2O flame also give 0.5ppm false positive. But both above mentioned sample would not give false positive when measured by C2H2-air flame. What is the reason?
what is mean by peak intigrity?
How much is the standard area for glc analysis
1.What is the difference between method validation and method verification 2.Which guidelines proposed to method transfer
How you develop a method in HPLC?
please explian me about area normalisation method,diluted standard method,impurity vs impurity and which one has to be selected in method development
