Interested to Buy Any Domain ? << Click Here >> for more details...
In HPLC what is Single point threshold, peak purity index
and minimum peak purity index? what should be consider for
pure peak.
- 3 Answers
- 32529 Views
- I also Faced
- E-Mail Answers
Answer Posted / m
Single point threshold is show only peak maxima spectra
whenever peak purity index is shows the front, tail and
peak maxima spectra.
for pure peak we have to consider three point peak purity
which shows that your purity angle should be less than
purity threshold which is clearly shows that your peak is
specrally pure and homogeneous.
| Is This Answer Correct ? | 38 Yes | 7 No |
Post New Answer View All Answers
in which situation require to change rs specification?
Why only hydroxy naphthol blue indicator is used for standardisation of 0.05M EDTA solution instead of solochrome Black T or Euriochrome Black T indicator which is used for all sample analysis with 0.05M EDTA solution?
How to calculation of residual solvent methanol (3000 ppm) standard solution, and how many quantity used of test sample
why lactose has less charges when packed in steel containers when compared with packing of lactose in polyamide material?
pharma industries oriented
Why six unit used for precision?
In HPLC calibration, caffeine is used as primary standard for wave length calibration due to caffeine is having dual maxima at 273 & 205 nm and one minima at 245 nm. Any body can give reference of these details from any pharmacopeia (with chapter no.) or any other authentic guideline?
If change in specification which parameter require to do for validation? if change in chromtographic condition then which parameter? if api change then which parameter? if change composition then which parameter? if old method not work out then whicj parameter? if additional one impurity added then which parameter of validation require to do on above each conditions? elaborate separately
in DMF having extra impurities and in api COA also having extra imp than USP or BP product then how require to proceed?
What are usp limits for theoritical plats,resoution,tailing factor,peak to valley ratio
My question about gas chromatography sulfur chemiluminsecence detector. I test unknown sample gas by GC-SCD (calibrated ) and the result of *H2S is 279 PPM , *but when I test the same sample with the GC-TCD (calibrated ) the value of *H2S is 2500 PPM . I'd like to inform you that both GCs are calibrated and have very good operation conditions with stable parameters . the question is if the sample gas with higher H2S over detection limits of SCD detector (1000 ppm). why the result it 279 ppm Best regards
Which are the diffrent grades of api in pharma?
Why acetonitrile and water are used as extraction solvent when analysis melamine? I thought they are miscible and won't be able to separate...
[3/28, 20:52] Manoj P Venkatpurwar: how many impurities require to inject in assay specificity that how we can find out? and in Rs also how?
what is the origin to prepare standard operating procedure
