On the same voltage, the resistance of the filament of the bulbs of 200 watt and 100 watt are R1 and R2, then (1) The value of R1 is twice that of R2 (2) The value of R2 is four times the value of R1 (3) The value of R1 is four times that of R2 (4) The value of R2 is twice that of R1
1 2828The filament of an electric lamp becomes white hot but the lead in wires holding the filament are only slightly heated because they (A) Have smaller current passing through them (B) Have very low resistance (C) Have higher melting point (D) Are made of black iron
1 4072Two lamps have tungsten filaments. The resistances of two lamps at incandescence are r and R, R being greater than r. These lamps are connected in series. Then (1) The lamp with resistance r will shine more brightly (2) The lamp with resistance R will shine more brightly (3) Both will shine equally brightly (4) No prediction can be made regarding brightness
1 2502The most largely used metallic filament in a 60 watt bulb is (1) Aluminium (2) Titanium (3) Tungsten (4) Nickel
2 2939
How to kill filamentous phages?
How to preserve filamentous fungi in distilled water ?
Explain the filamentous structure of Rhizopus?
state the disadvantages of carbon filament???
3x3x2.5 m room temperature increases by 20 deg cel in 24 hours by a lamp of 100 w. then tell the temperature of the filament
A 100W electric lamp is supplied from a 115V, 60HZ source. The peak instantaneous power dissipated in the lamp filament is
Describe the colour rendering properties of i) tungsten filament lamps ii) tubular fluorescent lamp