Topic :: Device
LMI operates between the Frame Switch and what other device? A.) CPE device B.) Another Frame Switch C.) X.25 switch D.) Novell File Server
2 6592Which device listed below provides clocking for the line? A.) DCE B.) CPE C.) CO D.) DTE E.) Demarc
2 5938What is a key use of a device hardware address? A. to obtain a vendor code / serial number from the user B. to transmit a frame from one Interface to another Interface C. to transmit a packet from one local device to another local device D. to transmit data from one local device to a remote device across the internet E. to contain logical information about the device to use for end-to-end transmission
1 3731A network is vow congested currently all the devices are connected through a hub. Which would best decrease congestion on this network? A. add a second hub B. replace the hub with a router C. replace the hub with a switch D. replace the hub with a repeater
1 4006Which type of LAN segmentation device enables high speed data exchange? A. hub B. bridge C. switch D. repeater
3 10335A device has 2 synchronous ports, 16 asynchronous ports, and one ethernet port. What is this device most likely to be? A. CSU/DSU B. Access Server C. Multiplexer D. ISDN Terminal Adapter
2 3659Match the following devices with the correct description. A. Switch 1. Operates at the physical layer and extends the cable as if it is a single cable. B. Router 2. Operates at the physical layer and connects all connections into one device or concentrator. C. Repeater 3. Operates at the network layer and can filter both hardware and network addresses. D. Hub 4. Works at the Data-Link layer and transmits a digital signal only to the specific port where the destination MAC address is located.
1 3060In an ATM network, which type of device is in a LAN per ELAN (Emulated LAN)? A. LAN Emulation Workstation B. LAN Emulation Router C. LAN Emulation Server D. LAN Emulation Bridge
1 2991What would a TE2 device be used for in an ISDN connection? A. as a connection from an NT1 device to an NT2 device B. as a connection from a non-ISDN terminal through a TA to the ISDN network C. as a connection from four-wire subscriber wiring to the conventional two-wire local loop D. as a connection to the ISDN network through a four-wire, twisted-pair digital link
2 9129
Which Altera device families does the TimeQuest timing analyzer tool support?
You have a driver that drives a long signal & connects to an input device. At the input device there is either overshoot, undershoot or signal threshold violations, what can be done to correct this problem?
How to Pass TPrinter handle to GetDeviceCaps() ?
what is device manager,and its functions?
list TWO problems that force some operating system to use the technique of device dedication
exactly how does an RTD 3 wire or 4 wire device cancel out the resistance of the wires , opposed to a 2 wire RTD? Is it because you have resistors in parallel , or because something to do with the electronic circuit the RTD is connected to ?
Device an algorithm for weiler-atherton polygon clipping, where the clipping window can be any specified polygon
• The silicon of a new device has memory leak. When all "0" are written into RAM, it reads back all "0" whithout any problem. When all "1" are written, only 80% of memory cells are read back correctly. What can be possibly the problem with the RAM?
procedure is for backing up Windows SBS 2008 to a Network attached Storage device
What is the difference bitween control net scaner and device net scaner
which electronic devices used at low frequencies? and high frequencies?and microwave frequencies?
If any one's require of phoenix contact like( relay , termilnal block , surge protection device ) , product please contect me 09878206357 chetan verma
Question 1 A low-level format received by a floppy disk does what? a. Adds a root directory b. Includes a FAT (File Allocation Table) c. Stores 720K d. Creates a structure of sectors, tracks, & cluster. Question 2 A user is complaining of problems. You find that upon startup, the IBM machine give two beeps alerting you to a POST error. Error code 301 shows. What is wrong with this machine? a. There is a monitor error. b. There is a keyboard error. c. This is not a POST error. Two beeps indicates a motherboard error. d. There is a serial card error. Question 3 What is this an example of? A. A 30-pin SIMM B. A 72-pin SIMM C. A 168-pin DIMM D. C-RIMM Question 4 Bridges are capable of which? a. Expanding the length of a network segment. b. Acting as a firewall. c. Segmenting networks. d. Communication of computers on a LAN. Question 5 Which is true of a female DB 15-pin video port? a. It has 2 rows of 5 pinholes. b. It has 3 rows of 5 pinholes. c. It has one row of 8 pinholes and one row of 7 pinholes d. It has one row of 6 pinholes and one row of 9 pinholes Question 6 You have just installed two hard drives into the same machine. One is set up as the slave and both are on the same IDE channel. You notice that the drive's LED light is constantly lit on the slave drive. What do you need to do to fix this? a. Troubleshoot the slave drive by reconfiguring the slave to be the master, removing the original master drive, then rebooting. b. Disable the secondary controller in the BIOS. c. Manually enter the drive settings on the BIOS. d. Install more memory. Question 7 SVGA and Ultra VGA are two distinct video standards. True or False? a. True. b. False. Question 8 SVGA is represented by all of the following resolutions except: a. 1600 x 1200 b. 800 x 600 c. 640 x 480 d. 1280 x 1024 Question 9 Which is true of an Active Matrix LCD? a. The LCD is divided into two halves. b. The LCD is divided into two halves. c. Each pixel is constantly refreshed. d. The pixels are fixed. e. It uses more electricity. f. None of the above. Question 10 What are the correct stages and order of the EP laser printing process? a. Cleaning, Writing, Conditioning, Developing, Fusing, Transferring, and End of Cycle b. Cleaning, Conditioning, Writing, Developing, Transferring, Fusing, & End of Cycle c. Erasing, Writing, Heating, Developing, Fusing, Transferring, & End of Cycle d. Conditioning, Erasing, Writing, Developing, Fusing, Transferring, & End of Cycle Question 11 Choose the correct associations (pick 2). a. 802.4 – Internetworking b. 802.6 - Metropolitan area network c. 802.9 - Integrated voice and data networks d. 802. 11 - Token ring LAN Question 12 What is the function of a Layer 2 switch ? a. forwards data based on logical addressing b. duplicates the electrical signal of each frame to every port c. learns the port assigned to a host by examining the destination MAC address d. determines which interface is used to forward a frame based on the destination MAC address. Question 13 An administrator would like to connect ten workstations on a 192.168.0.0/24 network. The device selected by the administrator must allow connectivity between hosts without sharing bandwidth. Which device would be appropriate? a. Hub b. Router c. Switch d. Repeater Question 14 Which devices are primarily used to extend cable segments within a collision domain by regenerating the data signals? (Choose two.) a. switch b. repeater c. router d. bridge e. hub Question 15 Which networking devices use the MAC address to make forwarding decisions? (Choose two.) a. NIC b. bridge c. hub d. switch e. repeater Software : 1. Briefly describe the data type conversion feature of Oracle SQL and PL/SQL. 2. What is INDEX? Describe its benefits. 3. Write down the name of five most popular RDBMS. 4. What is UML? Write some Diagram name. 5. What is HTML and XML? 6. What is CSS and AJAX and their benefits? 7. What is software quality assurance? 8. Describe components of a typical test plan? 9. What is the difference between QC and QA? 10. What is Verification and Validation? 11. What diff b/w black box and white box testing? 12. What is the difference between System Testing, Integration Testing & System Integration Testing? ATI Limited Question Paper Duration Time : 1 Hour and 30 Minutes Question 1 A low-level format received by a floppy disk does what? a. Adds a root directory b. Includes a FAT (File Allocation Table) c. Stores 720K d. Creates a structure of sectors, tracks, & cluster. Question 2 A user is complaining of problems. You find that upon startup, the IBM machine give two beeps alerting you to a POST error. Error code 301 shows. What is wrong with this machine? a. There is a monitor error. b. There is a keyboard error. c. This is not a POST error. Two beeps indicates a motherboard error. d. There is a serial card error. Question 3 What is this an example of? A. A 30-pin SIMM B. A 72-pin SIMM C. A 168-pin DIMM D. C-RIMM Question 4 Bridges are capable of which? a. Expanding the length of a network segment. b. Acting as a firewall. c. Segmenting networks. d. Communication of computers on a LAN. Question 5 Which is true of a female DB 15-pin video port? a. It has 2 rows of 5 pinholes. b. It has 3 rows of 5 pinholes. c. It has one row of 8 pinholes and one row of 7 pinholes d. It has one row of 6 pinholes and one row of 9 pinholes Question 6 You have just installed two hard drives into the same machine. One is set up as the slave and both are on the same IDE channel. You notice that the drive's LED light is constantly lit on the slave drive. What do you need to do to fix this? a. Troubleshoot the slave drive by reconfiguring the slave to be the master, removing the original master drive, then rebooting. b. Disable the secondary controller in the BIOS. c. Manually enter the drive settings on the BIOS. d. Install more memory. Question 7 SVGA and Ultra VGA are two distinct video standards. True or False? a. True. b. False. Question 8 SVGA is represented by all of the following resolutions except: a. 1600 x 1200 b. 800 x 600 c. 640 x 480 d. 1280 x 1024 Question 9 Which is true of an Active Matrix LCD? a. The LCD is divided into two halves. b. The LCD is divided into two halves. c. Each pixel is constantly refreshed. d. The pixels are fixed. e. It uses more electricity. f. None of the above. Question 10 What are the correct stages and order of the EP laser printing process? a. Cleaning, Writing, Conditioning, Developing, Fusing, Transferring, and End of Cycle b. Cleaning, Conditioning, Writing, Developing, Transferring, Fusing, & End of Cycle c. Erasing, Writing, Heating, Developing, Fusing, Transferring, & End of Cycle d. Conditioning, Erasing, Writing, Developing, Fusing, Transferring, & End of Cycle Question 11 Choose the correct associations (pick 2). a. 802.4 – Internetworking b. 802.6 - Metropolitan area network c. 802.9 - Integrated voice and data networks d. 802. 11 - Token ring LAN Question 12 What is the function of a Layer 2 switch ? a. forwards data based on logical addressing b. duplicates the electrical signal of each frame to every port c. learns the port assigned to a host by examining the destination MAC address d. determines which interface is used to forward a frame based on the destination MAC address. Question 13 An administrator would like to connect ten workstations on a 192.168.0.0/24 network. The device selected by the administrator must allow connectivity between hosts without sharing bandwidth. Which device would be appropriate? a. Hub b. Router c. Switch d. Repeater Question 14 Which devices are primarily used to extend cable segments within a collision domain by regenerating the data signals? (Choose two.) a. switch b. repeater c. router d. bridge e. hub Question 15 Which networking devices use the MAC address to make forwarding decisions? (Choose two.) a. NIC b. bridge c. hub d. switch e. repeater Software : 1. Briefly describe the data type conversion feature of Oracle SQL and PL/SQL. 2. What is INDEX? Describe its benefits. 3. Write down the name of five most popular RDBMS. 4. What is UML? Write some Diagram name. 5. What is HTML and XML? 6. What is CSS and AJAX and their benefits? 7. What is software quality assurance? 8. Describe components of a typical test plan? 9. What is the difference between QC and QA? 10. What is Verification and Validation? 11. What diff b/w black box and white box testing? 12. What is the difference between System Testing, Integration Testing & System Integration Testing?
how disable usb device in group policy editor all configure tell me early
Which type of devicesa used for detection of radio active field in side the reactor building?
