How SNMP communicates to Managed Devices and Do it takes
help of other protocols?
Answers were Sorted based on User's Feedback
Answer / sandeep patra
SNMP is an Application layer protocol. except few
application layer protocols all other protocols uses any of
the transport layer protocols.
SNMP basically uses UDP as the transport layer protocol. It
can also uses TCP as well.
Now the communication part:
SNMP basically uses two UDP ports 161 and 162 for
communications between SNMP MANAGER and AGENTs.
port 161 is user for REQUEST/REPLY kind of communications.
These type of communication is synchronous in nature.
port 162 is used for asynchronous communication. Like
sending traps to SNMP Manager to inform about some fault in
SNMP Agent.
Is This Answer Correct ? | 3 Yes | 0 No |
Answer / m.kumararaja
Yes, Whenever the SNMP Communicate with the device it uses
transport protocol UDP (user Datagram Protocol). It is one
of the connectionless transport protocol.
Is This Answer Correct ? | 2 Yes | 0 No |
Answer / vikram malhotra
With the help of UDP, SNMP communicate with the Managed Device.
Is This Answer Correct ? | 1 Yes | 0 No |
Answer / jonnalagadda rajeh
snmp means simple network management protocol actually any
of the protocol we are using in daily life majorly coming
under 3 categories TCP, UDP and ICMP. SNMP is the
Application layer protcol most of the application layer
protcols uses either TCP or UDP protocol. SNMP uses UDP
(user datagram Packet) here it user datagrams. It is
Connectionless protocol. Actually this snmp protocol used
for lan management. in order to maitain large network
organizations use snmp server to maintain users and database
this is simple like central monitoring. it uses 2 port
numbers 161 and 162 for communication between snmp server
and snmp client like send and reply uses port number 161 and
162 for sending traps
Is This Answer Correct ? | 0 Yes | 0 No |
Answer / braj raj singh
Yes , It can be TCP or UDP. But Since SNMP is a management
protocol , UDP is prefered as the underlying protocol for
it.
Is This Answer Correct ? | 0 Yes | 2 No |
RIP has a long convergence time and users have been complaining of response time when a router goes down and RIP has to reconverge. Which can you implement to improve convergence time on the network? A) Replace RIP with static routes B) Update RIP to RIPv2 C) Update RIP to OSPF using Link State D) Replace RIP with BGP as an exterior gateway protocol
A COM PORT IS A----------- PORT
What is data com?? How it works, what is diffrence between datacom and telecom?
1 Answers Aircel, Juniper Networks, Wipro,
what is the use of proxy in SNMP.Does it require only when the network has snmpv1 and snmpv2.
MEMORY THAT IS PAGED OUT TO THE HARDWARE IS KNOWN AS
What do you mean by MIB and where does it stay?
12 Answers Celstream, Lucent, Mphasis,
What is networking ?
12 Answers HCL, Omani International,
Multiple Choice The devices found in datalink layer are Router Bridge NIC Repeater Memory
Suppose in SNMP managed Network, Network card of one machine fails then how Management Devices comes to know about this machine and suppose in other case machine gets shutdown then how it will be recoginised.
how much does a Blu-ray have memory
what is the networking control unit?
what is ic precaution?