What is Summarization and supernetting and what its use?

Answers were Sorted based on User's Feedback



What is Summarization and supernetting and what its use?..

Answer / unknown

Folks do not look for the answer please and please give a
try.

are you asking about route summarization?

on the fisrt eye both suppernating and summarization are
same thing like comibing the Multiple subnet in the single
subnet is called suppernating or sumrization

I am giving you a task


1) Take two router
2) connect it throgh serial interface
3) take a /30 ip and assighin it you can take 192.168.1.0/30
4) on router 1 fa0/0 configure the ip 10.10.10.1 /8
5)run the Eigrp
6) put auto summry
7) on router 1 fa0/0 configure the ip 10.10.11.1 /8
8)run the Eigrp
9) put auto summry

try to ping 10.10.11.1 are you able to ping it

if yes then great and if no Then tell me why.

do the excesise at least and please let me know

Is This Answer Correct ?    3 Yes 1 No

What is Summarization and supernetting and what its use?..

Answer / unknown

I am giving you a task


1) Take two router
2) connect it throgh serial interface
3) take a /30 ip and assighin it you can take 192.168.1.0/30
4) on router 1 fa0/0 configure the ip 10.10.10.1 /8
5)run the Eigrp
6) put auto summry
7) on router 2 ( typo correted) fa0/0 configure the ip
10.10.11.1 /8
8)run the Eigrp
9) put auto summry

try to ping 10.10.11.1 are you able to ping it

if yes then great and if no Then tell me why.

do the excesise at least and please let me know

Is This Answer Correct ?    1 Yes 0 No

What is Summarization and supernetting and what its use?..

Answer / unknown

@person who marked it wrong )Please post the correct answer
if you really know.If donot move yopurs butt from here

Is This Answer Correct ?    1 Yes 0 No

What is Summarization and supernetting and what its use?..

Answer / pramod choudhary

comibing the Multiple subnet in the single
subnet is called suppernating or sumrization
used for time consuming the best answer this

Is This Answer Correct ?    0 Yes 0 No

Post New Answer

More CCNA Interview Questions

Which of the following are Transport layer protocols? A.) UDP B.) TCP C.) NBP D.) IP E.) SPX

3 Answers  


The Internet Protocol (IP) occurs at what layer of the seven layer model? A.) Physical B.) Presentation C.) Network D.) Datalink E.) Session F.) Transport

3 Answers  


Identify the keystroke used to terminate the setup mode? A.) Ctrl-K B.) Crtl-C C.) Ctrl-Z D.) Crtl-End

2 Answers  


What are some standards supported by the Presentation layer?

1 Answers  


Differentiate full-duplex from half-duplex.

1 Answers  


What is the virtual path?

1 Answers  


When using RIP, routing updates are broadcast every ____ seconds. A. 30 B. 10 C. 60 D. 90

4 Answers  


What is the Difference between Hub and Switch?

2 Answers  


How many valid host IP addresses are available on the following network/subnetwork? 176.12.44.161/30 A. 2 B. 30 C. 254 D. 16,382 E. 65,534

4 Answers   Cisco,


When ip confliction accord in subnet which ip assigned automatically and what it called?

1 Answers  


What is the diiffernce between windows xp & windows 2000?

6 Answers   TCS, Trimax, Trymax, VigaTech,


Which port numbers are used by TCP and UDP to set up sessions with other hosts? A.) 1024 and above B.) 6 and 17 respectively C.) 1-25 D.) 6-17

6 Answers  


Categories