What are the main terms in unit operations? What are its characteristics?

1111

Name the some common problems associated with bellow expansion joints?

1053

What type of flow measurement devices is best for slurries?

1097

After conducting an internet search for ways to reduce energy costs, I found a recipe for whitewashing that is said to reflect sunlight. The recipe calls for 20 pounds hydrated lime to 5 gallons water to 1-quart polyvinyl acetate. What is a good source of polyvinyl acetate that I can buy at a local store?

1023

Can condensate control in a reboiler cause water hammer problems?

1145

MY generator water cooler inlet line height - 11 mtr inlet water line height - 7 mtr water come into the line from overhead tank, O/H tank height - 20 mtr the first tapping in the inlet line is 2" line which down to 4 mtr level plateform., second tapping in inlet water line goes to a pump 6" line installed at 4 mtr level plateform, pump capacity 200m3/hr, head- 30 mtr, hp-40. the outlet of pump of 6" water line connected to a header of 6 mtr long of 6" line, on this header the six tapping are connected, 4 nos. 3" line goes to 11 mtr height water cooler the pressure of the line is 0.15 to 0.25 kg/cm2, 2" and 4" pipe line connected to a cooler at 4 mtrlevel plateform. my question is, at 11 mtr height level the quantity of water and flow is not sufficient for my cooler, the temp. of cooler is rises much more. you are requested to suggest the modification of pipe line/ pump for take more water flow and pressure (desired pressure is 1 kg/cm2)

2390

sir,please give me some exam paper for referance. Thanks & Regards,

2155

What is vapour flooding and liquid floodin in distillation?

1692

Under what circumstances are vortex flowmeters the most accurate?

1207

send previousyear question paper for ongc gt 2011 chemical engineering written exam

3365

how can I find out a sulfuric acid recovery plant disigner?

2502

what is the cast iron grade of composition of c-3.06% , Mn- 0.48% , Si-2.38% , S-0.088% , P-0.092% , Cr-0.12% , Ni- 0.012% , Mo-0.00%

2155

Hallow everybody, we want to know in a NPk fertilizer process plant (Bulk Blender) we are in doubt if use square or rectangular hopper jus to avoid the vault effect durin the flow of of raw material like Phosphorus, Potasium and zeolite..Please any advise will be appresated Isdray

4293

what is the hearth and arch pressure in furnace?

4059

what is mass flow rate of steam of 7 kg/cm2 pressure in 1 inch id. pipe.

2912