a bulb of 100W and anather bulb of 200W , rated supply
voltage 230v.when supply voltage is reduced to 100v,which
bulb will give more light? and why with calculation?
- 12 Answers
- 32797 Views
- I also Faced
- E-Mail Answers
Answer Posted / boopathi
power =current*voltage
100w and 200w pulb are glowing in 230v resrectively.
reduced the current means voltage.also reduced the current .
so more current is take to the 100w bulp.not enough of
cuurent is take the 200w.
| Is This Answer Correct ? | 12 Yes | 16 No |
Post New Answer View All Answers
all the technical question with answers pleas send your email id ramar_eee@yahoo.com
All the socket in a room become very hot, the Wall was also became very hot and the earth conductor also became live, what in your view might be the possible causes?
71ohm,111ohm,95ohm,179ohm in calculate the total ohm in series circuit
what should be the ideal gauge of wire (In sq mm) for different loads in Ampere?
What is essential to prove safe isolation of electrical circuit?
can mini-curcuit supply MIL-tested transformer !
sourse is 66 KV / 350 MVA, transfarmer is 1000 KVA 6.6 / 0.415 kv, iF fault is 28.75 MVA on 0.415 KV Bus then calculat the Transfarmer Impidance
what is proper capacitor placement? How to evaluate capacitor size?
hi this is hema can anyone mail me previous years questions for the APPSC-A.E.E (in electrical stream.) ......thank u.
one conductor length is L.and i am strech uniformly this conductor and made length is 2L.so resistance of this strech conductor is R=4R..but i want to know about area of stech conductor hows it become a/2..
I want definition for ABT Meter (Availability Based tariff) ?
what is class of SPD and dittels of all class ?
How to derive detailed design of Suitable bus Bar for 100A for 6.6KV?
What is method of calculating the fault current for a MDB, 50KW, 3PH, 415V, 50HZ?
What is purpose of reactor?.What is different between line and bus reactor?
