Identify the purpose of the following command 'ip route
192.168.100.0 255.255.255.0 10.1.0.1'
A.) Enabling a dynamic routing protocol
B.) Creating a static route to the 10.1.0.0 network
C.) Teaches the router about the distant network
192.168.100.0 and how
it can be reached via 10.1.0.1
D.) Assigning the IP address 192.168.100.0 to an interface
Answer Posted / guest
Answer: C
A static routes teaches the router about a distant network
and the next
hop to reach that network. Command syntax:
ip route network-address subnet-mask next-hop-address
Is This Answer Correct ? | 3 Yes | 0 No |
Post New Answer View All Answers
Which protocol comes under hybrid dynamic type?
Which cable we connect in db-9?
GUYS i was refraining the OLD post and i got a good Question and wana make sure that you guys Just did not vist it for answers if you are not Aware google it understand it and then answered it the question is -: Significance of IP helper-address Command on SW? Is it necessary to put this command? you donot wana to give answer please donot visit this question and increase the vistor name if you are thinking that answer is wrong mark it wrong and explain why you are marking it wrong
Explain the types of communication in ipv4?
Define the igp (interior gateway protocol)?
What is ping utility?
On which bas ospf take decision?
Explain the difference between rip and ripv2?
What is difference between routing and routed protocols?
What is 100BaseFX?
What is difference between flsm and vlsm?
What we called 64 bit mac-address in ipv6?
Differnce between the communication and transmission?
Differentiate Logical Topology from Physical Topology
What is GRE in PPTP?