which type of capacitor store high amount of energy for long
time ? ( polarized or unpolarized )
- 1 Answers
- 1958 Views
- I also Faced
- E-Mail Answers
Answer Posted / rajalakshmi
Non polarized
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
What is the function of the generator exciter?
Whether IP65 enclosure box blocks ventilation if driver for LED have to enclosed inside IP65 box
Sir,In our company there are 3 caterpillar make(capacity:(1) 3.3KV,2.5MW(2)3.3KV,2.5MW & (3)3.3KV,1.9MW) & 1 deutz make (capacity:11KV,3.8MW)gas engines utilised,all are running in paralell. There are three transformer utilised,(1) 6.25MVA,3.3KV/22KV,Impedence voltage:6.7% used for two generator,both are 2.5MW(2)5.5MVA,3.3KV/22KV,Impedence voltage:7.2% used for one generator of 2.5MW & (3) 5.5MVA,11KV/22KV,Impedence voltage:7.8% used for one generator of 2.5MW.all generator breakers capacity of 1250Amps. Sir,I want the details of fault level calculation of generator,transformer individually & for whole system. If you require any information from me.feel free for contact me sir.pl.send the answer of my question as the earliest as possible.
What is the comparison between 30mA DP RCCB and 100mA DP RCCB and can replace it against 63A MCB
How can find thermal state value in relay for calculate thermal overload.
Explain the functioning of diode?
How to calculate LT XLPE CABLE for 11 kv / 433 v , 1000 kva oil type transformer system?
WE know that for Inductor X=2pifL,In DC f=0,then X=0 so,V=IX=0;But In the DC excitation of rotor of AC generator,DC motor field coil which coils are inductor so why does not applying DC voltage short the rotor coil of AC generator and field coil of motor?If it would then DC source might be damaged but it is not happened. Why does the strand conductor of Electrical power transmission line make twist?
What is diversity factor in electric installations?
Hi everyone. Some Generators uses 3-Pole breakers with extra contactors for Neutral. Some uses 4-Pole. Why so? What is the idea behind this? Thanks in advance for the solution. Kr.
the site measured knee point voltage of protection class CTs should be greater than rated knee point voltage? what about meetering class CTs. Should it be below the rated knee point voltage?
Why is remote backup preferred to local backup?
what happen if the parallel generator phase angle shift by 1 degree in manual mode
WHAT IS MEANT BY INSULATION CLEARANCE IN VACCUM?
all details of DG UPS HVAC
