What is the name of
instrument to find the
camber of a road?
- 2 Answers
- 5307 Views
- I also Faced
- E-Mail Answers
Answer Posted / amit sarkar
camber pata
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
how to check and keep control on the wastage of material at site
Which is the best book for building construction?
How many kilo-newtons equals 1000 kilogram?
As per Kandal suggestions, we have implemented rolling starts on 140 (+/- 5) degrees and we kept 3 rollars to complete the rolling before falling 125 degrees and the Aggregate AIV is below 22. But When the DBM bed is being rolled 3rd high viabration, (Before 1 plain & low ,2 high Viabrations), the aggregate is getting sharp edge agg. projections are damaged. As the literature is said that, the VG-30 Grade having better control the temp. susceptibility than Penetration grade. if so we could not get this problem at site. But we are facing on site. let me know.
what is flexible and rigid footing?
usually hand broken stones are used for cement concrete 1:4:8 in foundation of single /two story houses with a view of economy in construction.what advantages it will give if you use machine crushed stone in place?
how do you calculate the quantity of steel,cement for plinth beam. (example size 41'*0.58'*1.08')
how to decide the mortar ratio 1:4,1:6 in masonry? same in plaster 1:3 and 1:4? which code or any document reference taken to define proportion?
Coverage of 25mm.thick ratio of 1:4 cement mortar?
what is meant by residual strain?
how we calculate the grade of the Bituminous materials.?????
1.How much batten required for 1 sqm Shuttering. 2.how much pipe & clamps required for staging of 100 sqm shuttering at 5.0 m height.
define the strength
how to take the quantity of block work and plastering 1block price:3saudi riyal cement:1bag:15 saudi riyal sand:3bag:20 saudi riyal 1mason:9hour per hour 40 saudi riyal 1labour:9hour per hour 40 saudi riyal can anybdy calculate
What is kn measurement?
