Period of infinite continuous fourier series
a. N
b. N+M
c.infinite
- 1 Answers
- 4621 Views
- I also Faced
- E-Mail Answers
Answer Posted / malik
infinite
| Is This Answer Correct ? | 3 Yes | 1 No |
Post New Answer View All Answers
by what factor the starting current is used when comparing star and delta connection for motor starting?
Will any motor burn if voltage provided is lesser than the rated voltage???? If yes, then how is speed control possible with voltage control
how many parameters can integrate with fire alarm basically ?
Mr. mohh sahid m not satisfied for ur answer to the que weather the size of transformer increases or decreases withchange in fr for more detail go to the answer given by me
How to define Kirchhoff current law and voltage law along with simply examples.
How to do fabrication , busbar and wiring cost for : 1. LT Panels 2. C& R Panel
What is the end effect of linear induction motor ??
We have drive feeding an output contactor for a 5000 hp motor @ 5kV application. The motor FLA is 629amps x 1.25% service factor = 786.25 amps The cable that we current have in place between the drive and the output contactor is 350kcmil- MV-105 (parallel cables). Per the NEC table 310.60 (C) (69). This show the cable ampacity is at 615 amps per cable for a rating of 1230 amps. We have derated the cable for the cable tray and the multiple cables application and our calculations show that after the correction factor factor we are at 922amps. 1230 amps x .75% correction factor factor = 922.5 amps. The customer is driving us to then use another safety factor of .25% off of the already derated cable. Can you please provide a longhand calculation for your solution on this application?
what is high and low cut off voltage of BB and DG at SPS????????
If an electrical component has a positive temperature coefficient, how come such components have high power losses due to heat if current decreases when resistance increases? assuming power given by I^2*R whereby the Resistance is infinite.
why Current is lead 90 degree and voltage is lag 90 degree in a capacitor.? why Current is lag 90 degree and voltage is lead 90 degree in an inductor.?
what is meant by flywheel and its role in retardation test
If two Transformers are connected in parallel having impedance of 50KA in both transformers will the impedance increase or decrease after connecting transformers in parallel?
hi, i have 3x200KVA and 2 x 80KVA UPS with battery bank of 150AH 68Nos. and 100AH 204Nos., i need to install AC either ductable or PAC type, so can you help me to calculate heat load and capacity of the AC to install.
how much cable size required for 70 kilowatt load.
