it is difficult to interrupt a capacitive current because
(a)it has a leading power factor
(b)current magnitude is very small
(c)the restriking voltage can be high
(d)stored energy in the capacitor is high
Answer Posted / krunal patel
The restriking voltage can be high
Is This Answer Correct ? | 11 Yes | 1 No |
Post New Answer View All Answers
how the works electronic energy meter?
What is the relation between frequency and motor rpm?
How to calculate the multiplying factor for energy meter with ct ratio given
what are the dimensions for 200 kva transformer plinth (plateform),in which pcc m20 is used..
Practical condition in 400KV Sub station:- Breaker(open) , isolator(open), Earthing (close) at both end e.g A & B. Now Open A Stn Earthing than Open B stn Earthing (Which have a 50MVA reactor) , AND suddenly show R,Y,B phase 704KV,573KV,118KV respectively. Que is without closing of breaker how it is possible.???? My Whats app No:07621840498 for Further Discussion. Pls experts suggest.
Why are short circuit ratings always 16kA,25kA,36kA and 50kA.Who has fixed these?
Explain about retrofitting of machine tool.
how to determine the inrush current of a transformer
How to work definite,over pluxing,revers power,OSR relay
what will happen if i connect 12 volt battery with 24 volt battery charger.
how to do the ductor test?
we have provided 30 nos. relay contacts in panel.I want to know how do we do the numbering for the relay contacts as per any applicable standards
how does this job compare with others you have aplied for?
what is the difference between capacitive and resistive voltage divider?
what is the safe meggar values for motor, transformer HT, LT and Cables? IF we want to replace I/C bay at our 220 kv substation which is of 140 mw load capacity bay to be replaced by 400 mw capacity bay.other than CT(1200/1) what are the other equipment i have to replace. why we generally use 3.5 core cable or in other word 1/2 core for neutral and also confirm me that in balance conditiob(3 phase)current in neutral will zero