Answer Posted / tukuna das

RFC (Ready For Construction )

In cement making,what is meaning of blend,fineness,density. 

3527

---

What is the software used in civil engineering?

1111

---

What is a projection line?

1187

---

what do you mean by yeild stress of a material? What will happen when hit is given to cement?

2357

---

2. In a container filled with each of the following materials, at a porosity of 40%, determine the upward gradient required to cause the quick condition (a) Lead shot with a G = 13.75; (b) Fibre beads with G = 2.15; (c) Sand with a G = 2.32

2455

---

Slump Values for works?

2221

---

1. 1. The mass of a chunk of moist soil is 34 Kg and its volume is 0.012 cu. Meter. After drying in an oven, the mass reduces to 14.25 Kg. Determine the water content, the density of moist soil, the dry density, void ratio, porosity and degree of saturation. Take G = 3.25

2779

---

Calculate the maximum allowable speed on a horizontal curve of radius 350m if the maximum allowable values of the lateral coefficient of friction are 0.14 and the rate of superelevation is 0.08.

2516

---

How can i display 5 asterisk and another 5 asterisk )?

2516

---

What is the density of DLC & PQC and how it is differ from normal concrete?

3745

---

The foundations are placed below ground level, to increase?

1259

---

what is difference between NP2 NP3 NP4 CONCRETE HUME PIPES USED AT SITE

4110

---

if mineral admixture add into concrete then what is the differences between full cement concrete & fly ash added concrete of their SP. Gr.?and for the changes of SP. Gr. what is the changes in concrete

2100

---

3. A vane 12.5 cm long, 8.8 cm dia was pressed into a soft clay at the bottom of borehole. Torque was applied and the value at failure was 55 N-m. find the shear strength of the clay on a horizontal plane.

2140

---

I have completed building maintenance course in mcvc stream .. can I apply for the post of " sthapstya abhiyantriki sahayyak"?

2578

---