1. Why a DC motor starter is called 3 point starter
Answer Posted / richa
3 Point Starter is a device whose main function is starting and maintaining the speed of the DC shunt motor. it is called three point starteras it has three terminals.
L is the Line terminal, connected to positive supply.
A is the armature terminal and connected to the armature windings.
F is the field terminal and connected to the field terminal windings.
for more information on 3 point starter see here http://circuitglobe.com/3-point-starter.html
Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
witch pump used in wtp
what is difference between isolation and ultra isolation transformer?, what is the method of testing ?
Whether should be the oil level in OCTC transfomer? It should be upto winding immersed completely or should be upto tap changer s/w? How it will affect the performance of the transformer. Rating may be 33KVA
DEFINE BREAKING CAPACITY OF BUSBAR & HOW IT IS CALCULATED?
What is the comparison of PILC and XLPE cable
What is the diff. between single compression and double compression gland
When we use air circuit breaker, it has O/L protection ,time delay SC protection, Instataneous SC protection & ground fault protection. They all have some setting range. But what is the suitable/allowable setting for the above protection which will be safe for the equipment? For example-O/L protection setting have a range of (0.4,0.45,0.5,0.55,0.6,0.65,0.7,0.8,0.9,1.0)xIn Time delay SC protection have a range of (1.25,1.5,2,3,4,6,8,10,12)xIn Time delay setting is 0.02,0.1,0.2,0.3,0.4 Instataneous setting is fixed to 20xIn Gound fault setting is given 100A,300A,600A,900A,1200A This setting are for 2500A ACB. So what will be the basic allowable setting for the above protection? is there any formulae to calculate this<
How to arrange a hous hold earthing system to keep minimum earth resistance( below 7ohms).
why the frequency and voltage in india is 230v and 50HZ. when compared to USA say 110v and 60 HZ.
For group 1 , 2 whather i have to prepare my technical or general studies etc? and im graduate in ee engg. for wht posts im eligible for? please tell me!
Is it true online ups having bypass mode if it is true then why we called ups because it is interrupting power when goes in bypass mode
Why temperature rise is conducted in bus bars and isolators?
what is capacitor voltage transformer?? how it is different from potential transformer?
When we have earthing mesh or underground earthing network in industrial plants, weather we have NT-S or NT-C-S kind of earthing system, so eventually weather we must use 4 or 5 wire in 400 volt level (For example 3×150+70 mm2 or 5×150 mm2) in this connection I would like to know exactly the paragraph of IEC or IEEE number
iam using DM 3251 voltmeter(1 percent accuracy)for 11KV system PT ratio is 11KV/110V.can anybody explain what is the max and min voltage deviation.