Answer Posted / munna
short circuit
| Is This Answer Correct ? | 8 Yes | 0 No |
Post New Answer View All Answers
what is transformor oil gread
why -48 volts dc used in telecommucation
How impulse levels are calculated that for 11kV impulse is 75kvp, for 24kV impulse is 125kvp ?
we have one oven for 12 zone we are installed ir lamp in oven we control load from thyrister and 0 to 5vdc so our zone no 8 getting bright in fraction of second so what we do.. Please answer
when we design electrical schemes of 11/.415kv distribution..wen and were should we show the relays??what is the function of it?for example..we place EFR Relay CT between transformer neutral link and transformer earth.Like this what are the other type of relays we should use?why?where?Explain please..Thank you
Why is remote backup preferred to local backup?
Write down the design procedure of commutaj.
Could you measure voltage in series?
We have drive feeding an output contactor for a 5000 hp motor @ 5kV application. The motor FLA is 629amps x 1.25% service factor = 786.25 amps The cable that we current have in place between the drive and the output contactor is 350kcmil- MV-105 (parallel cables). Per the NEC table 310.60 (C) (69). This show the cable ampacity is at 615 amps per cable for a rating of 1230 amps. We have derated the cable for the cable tray and the multiple cables application and our calculations show that after the correction factor factor we are at 922amps. 1230 amps x .75% correction factor factor = 922.5 amps. The customer is driving us to then use another safety factor of .25% off of the already derated cable. Can you please provide a longhand calculation for your solution on this application?
how pt is using
After synchronization with grid what is the demand value QKVAR and how we will maintain that?
How PADO software increase the efficiency of power plant?
ROC converges if poles and zeros lie inside a. Origion b. Z=1
can someone explain that how the speed of the protection system affects the fault level calculation?
how to select the double earth conductor if 21A full load?
