How to calculate
crank length? How
to calculate hook
length?
Answer Posted / p.pragadeswaran
What is the purpose of crancked bars extended to another slab ? and what is its Technical name ?
Is This Answer Correct ? | 2 Yes | 1 No |
Post New Answer View All Answers
what pressure the NP2 class RCC pipe can sustain?
plz.show development and anchorage length in simple diagram.
what is the ingredient value of 40mm and 20mm aggregates?
How to calculate the cement consumption in RR Masonry in CM 1:8 for the foundation of Ground Level Reservoir
How much cement will require for 1Rmt Skirting laying
what is the meaning of degreasing of the euipment or line.
Laying bitumen concrete 40mm thick using 0.1372 cum of 13.2 10mm metal ,0.2387 cum of 10 5mm metal...what did it means please explain me how much cum of 10 mm metal need?
In earth work 1300 cum soil how to calculate how many liters require in water
foundation details for 25 ton weight Furnace on 2 supports and 2 tilters
how much cement and sand consuptin in 4 inch siporex walls 100 sq ft
how to determine the correctness of proportion used in cement mortor and various IS codes to determine the same?
A 16 pile group, consisting of diameter concrete piles, were cast in situ in a clayey soil whose unconfined compressive strength is 1100 psf. Each pile is 60 ft long and the pile spacing is 2.5 times the pile diameter.The water table is at the ground surface and saturated unit weight of the clay is 118 lb/cu.ft. using a factor of safety 3 and a reduction factor =0.45, compute the allowable capacity of the piles acting as individuals
what is the minimum cement content for M20 & M25 as per is code -456(2000).
Power grids in two adjacent states(A&B) are interconnected. Can power grid in state A can be represented by Thevenin Equivalent Circuit. If not explain Why?
what is the difference between replacement of cement by groundnut shell ash