why do MCB melt but not tripped in lighting highmast??
- 1 Answers
- 2338 Views
- AHPCL, I also Faced
- E-Mail Answers
Answer Posted / ravi sekhar
its used for the high ratin of mcb its not tripped
| Is This Answer Correct ? | 2 Yes | 1 No |
Post New Answer View All Answers
A 15 kw squirrel cage motor having a maximum efficiency of 90% on a continuous full load has temperature rise of 42 degrees celcius after 30 min and 52 degrees celcius after 1 hr under the above operation conditions. a) calculate its final steady state temperature rise on continuous load and the heating time constatnt. b) if the motor is operated on a short load for 9 min estimate its temperature rise. c) calculate the maximum overload that can be applied on a short, 9 min rating so that the temperature rise is the same as the final steady state temperature rise on continuous load.
sourse is 66 KV / 350 MVA, transfarmer is 1000 KVA 6.6 / 0.415 kv, iF fault is 28.75 MVA on 0.415 KV Bus then calculat the Transfarmer Impidance
What is load boxes ?
Explain marx circuit.
what heppend if we are connected u1-v1-w1 as a star point in the place of u2-v2-w2 in power genration
bitumar
what is the acceptable value of TAN DELTA and dissipation factor for 11kV, 1.75HP Motor?.
I want to merge a cable..in between two metering Cubicals which contains CT's and PT's and Energy meter..before taking merger..what are the common things required?
what is protection class current transformer.
sir i have a car stereo system and there is jack on him so can u tell me a way to find out their power terminals on the jack or on the circuit board"
Define the three phase formula fuse.
what is the difference b/w pvc cu conductor and cu breaded wire..?
if we have a industrial load of 400 kilowatts with 415 volt AC then how much total harmonic distortion (thd%) should be acceptable for steady power system.
In Indian Household, generally we receive 220V AC single phase supply. But AC has 2 phases, +ve & -ve. So in +ve half cycle current is flowing...so what happens in the -ve half cycle?? Please illustrate.
Can anyone explain me about the RLC based Impulse high voltage generator and how to and operation of Series resonant High voltage reactor...?
