Answer Posted / eeeeeeeeeeeeeeeeeeeee
1-High Water Temprature,
2-Over Speed,
3-Low Lube Oil Pressure,
4-Low Coolant Level,
5-Under Voltage
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
There is any especial requirement for motor to drive through with VFD?
We have 250 KW x 2 motors, which are load from 25% to 100% varying load in every minute , so how can we compansate the power factor. pl give your opinions on the above subject.
What is minimum permicible value of leackage current for LT Panle when applying voltage up to 3 KV for 5 Minuits?
What is the need of earthing transformer for delta side of a transformer. (Think of a line section between a star/delta transformer at a grid substation and delta/star transformer at a village. An earthing transformer is there at the delta side of the star/delta transformer at grid substation). As there are no ground reference there will not be fault current if a one phase is grounded. Further L-L phase will be sensed by the primary side of star/delta transformer as a L-G fault. So why an earthing transformer is required at delta side
What is the effect of pi controller on the system performance?
sir i had plane to do some project with the base of hopkinson test in AC supply its possible
how current is reverse from its normal direction during the fault?
WHY IN AC DRIVES,INPUT PHASE CURRENT SHOW UNBALANCE?
draw singleline diagram of star to delta and dol starters
What are the advantages of thermal power plant?
What is the phase relationship between the primary and secondary voltages of a transformer?
I am having dual speed motor of cromton greaves make of 3.7 KW -1400 rpm and 5 KW - 900 rpm. Please let me know groups and winding connction for rewinding purpose.
The loads are connected with phase and ground then why current flow as the loads ?
advantages and disadvantages of inverse definite minimum time RELAY
What is meant by reactance voltage?
