An atmospheric storage tank has a diameter of 20 m and a height of 8m.It is
half-full of liquid with the remainder of the space containing air normally at
atmospheric pressure.
If the connection to atmosphere is accidentally closed off and 10 cubic m of
liquid removed, what happens to the internal pressure of the tank?
What are the possible consequences for the tank?
- 1 Answers
- 4030 Views
- I also Faced
- E-Mail Answers
Answer Posted / carl_ellis
An atmospheric tank is likely to collapse inward from the
vacuum created by a closed or plugged vent when liquid is
removed from the tank because an atmospheric tank is not
designed to withstand pressures that a pressure vessel can
handle.
Carl Ellis
Measure First
| Is This Answer Correct ? | 1 Yes | 0 No |
Post New Answer View All Answers
What are the types of valves?
How to decrease opening & closing time of on/off valve?
In VVVF DRIVES VOLTAGE IS ALSO VARY WITH THE FREQUENCY. HOW? WHAT IS THE DIRECT FORMULA RELATING THESE TWO.
I want measure the volumetric flow of gas in waste heat recovery Boiler?Tell me how and which type of instruments required. Plz mail me:naba02222@gmail.com Sam please post the answer .
1.what is controller proportional gain 2.what is the controller intergral action time. 3.A proportional plus derivative controller that has a proportional band of 20% and a derivative action time of 0.1 minutes. Construct the shape of the output waveform for the triangular input if the input rises and falls at the rate of 4 units per minute.
If relative y axis vibration sensor is by passed, and relative x axis and absolute sensor is left working. how much monitoring i would have risked?
Explain about safety integrated level protection? . How it was differ from other protections ?
can anyone guide me how to get any of the previous year GAIL question papers? are they available? 0n 2nd august i have to take the written test.
If i have 4 Allen Bradely make RS logix 5000 PLC and for viewing that we are using 4 RS view SCADA for 4 different packages. Now, I will want to view two packages on only one SCADA. Then how i will do it?
What are the maximum packet size of: a) HART b) Profibus DP c)Profibus PA d) DeviceNet e) Foundation Fieldbus
How can test or measure the probe and extension cable to identify if the problem at the probe or cable or at the driver it self? (pleast notify the measuring method)
How many are the types of instrument cables in terms of No. of pair.
what is thermo coupler and how it works
Explain PID controller tuning & any one method used for it.
what is interface level measurement.who can calibrate interface level measurement transmitter online
