Answer Posted / mr.s.yuvaraj
Weight of bar per meter = Area of steel bar X Density of steel x Length of bar
= (3.14 x D2/4) x 7850 kg/m3 x 1000 mm
= (3.14 x D2/4) x 1000 x 7850 / (1000 x 1000 x 1000)
= D2 X 785.714285714286 x 0.00000785
= D2 X 0.006162
= D2 X 1/(0.006162)
= (D2/162.28)
Is This Answer Correct ? | 20 Yes | 0 No |
Post New Answer View All Answers
States some of the commonly used commands in cad software’s?
which red: used in roof teping, then use only cement
What is the force exerted by the tacoma narrows bridge?
How is calculate the cube molt
i have a interlock pavement work.i need to compact about 2000 sq metres of sub base grade c of thickness 15 cm.what is the amount of water required for compaction ??
What are the main reasons for conducting pull-out tests for soil nails?
Volume of 25kg putty bag & 40 kg putty bag volume??
what will happen if one could not properly follow the spacing of slab reinforcement bar?
Caching, Multithreading and RAMBUS are 3 methods for resolving the Bottleneck problem. Please give an explanation for each one (how are they resolve the problem?)
In foundation design, while we do the base pressure check, we normally check if the attained pressure value is less than the GROSS BEARING CAPACITY of the soil which is the sum of net bearing capacity of soil and the overburden pressure. Actually, the overburden pressure acts against the net bearing capacity of the soil and I feel that we are actually increasing the bearing capacity value and doing the check. I feel that this is NOT right. Please clarify on this.
5. Two long boundary walls run parallel to each other at a center to center distance of 1 meter apart. The width and height of the first wall are 0.30 m and 2.5m respectively. While those of the second are respectively 0.18m and 3.5m. Plot the distribution of vertical stress intensity due to walls on a horizontal plane, 1m below ground level. The walls have negligible depth of foundation and are made of brick masonry (y = 19.2 kN/m cu)
What is the meaning of Brick- M 35 grade? Is it a common brick or it's a concrete brick?
how many spacers we need for 1 ton reinforcement? aprox.
Explain why concrete barriers have curved surface profiles?
what values & beliefs have guided you in your career path