Answer Posted / simon
It varies 4rm motor 2 motor & supply 2 supply.
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
Is it good to short Neutral and Ground in the PLC or DCS main Power supply. Pls give YES or NO with reasons...? Simarpreet
How to test the Secure Elite 440 Multi function meter working condition.
A 15 kw squirrel cage motor having a maximum efficiency of 90% on a continuous full load has temperature rise of 42 degrees celcius after 30 min and 52 degrees celcius after 1 hr under the above operation conditions. a) calculate its final steady state temperature rise on continuous load and the heating time constatnt. b) if the motor is operated on a short load for 9 min estimate its temperature rise. c) calculate the maximum overload that can be applied on a short, 9 min rating so that the temperature rise is the same as the final steady state temperature rise on continuous load.
A car's starter motor draws a current of 100 A at 12,0 V when starting the engine. The mechanical power required to turn the engine is 960 W. At what rate is energy from the battery converted to non-mechanical forms of energy?
Who many reason of ignition fail ?
what will be d.g. capacity to cater together for 14hp A.C. load & 3kw lighting load
what is tri state logic gate
Draw a SLD of DG distribution up to main LT panel?
what is the maintaining Cf in UPS.
should %impedance be high or low in a power transformer? if so why?
what is the significance of tan&delta and how it performed in power transformer
Mr. mohh sahid m not satisfied for ur answer to the que weather the size of transformer increases or decreases withchange in fr for more detail go to the answer given by me
What are the function of different components of servo motor?
Differentiate between real and apparent power?
Earth has zero potential then what would be the neutral potential ?
