Interested to Buy Any Domain ? << Click Here >> for more details...
why high current produce in case of transformer when turns are
internally gets shorted.
- 3 Answers
- 6394 Views
- TCS, I also Faced
- E-Mail Answers
Answer Posted / k.prakashchandra
Impedance and back emf are reduced
| Is This Answer Correct ? | 6 Yes | 4 No |
Post New Answer View All Answers
Why is voltage is required to be within permissible range for an electrical equipment?
I am having a 1500 KVA transformer whose secondary current is 2086A and my connected load is 1000 KVA, I am having 400 KVAR APFCR for PF improvement what ratio of CT should i install in LT EB Bus to get optimum PF improvement?
WITCH CARDS IN USE IN FIRE CONTROL PANEL.
What is the maximum No. of out going mccbs permitted from an LV distribution paqnel? What is the ampere relation between incomer and out going switch gears/mccbs?
What is time response of the control system?
how can we understand that where we have to use ac or dc coil for solenoid valve and why?what is the different between coil of ac and dc explain please.
What is frantic effect?
what is differentila pilot supervision in the incomer control panel in the power station?
how to introduce yourself
What are the three types of compensators?
We have drive feeding an output contactor for a 5000 hp motor @ 5kV application. The motor FLA is 629amps x 1.25% service factor = 786.25 amps The cable that we current have in place between the drive and the output contactor is 350kcmil- MV-105 (parallel cables). Per the NEC table 310.60 (C) (69). This show the cable ampacity is at 615 amps per cable for a rating of 1230 amps. We have derated the cable for the cable tray and the multiple cables application and our calculations show that after the correction factor factor we are at 922amps. 1230 amps x .75% correction factor factor = 922.5 amps. The customer is driving us to then use another safety factor of .25% off of the already derated cable. Can you please provide a longhand calculation for your solution on this application?
why current is constant on d.c?
What is the name of the winding to which supply is given?
How can we increase fuel-power ratio of any DG set?
What the difference between ac and dc inductor an capacitor
