Is there any possibility of changing in dia of bar from
lower to higher (i.e Lower dia bar at bottom and Higher dia
bar at top)
- 3 Answers
- 5105 Views
- I also Faced
- E-Mail Answers
Answer Posted / guest
no possibility
| Is This Answer Correct ? | 0 Yes | 3 No |
Post New Answer View All Answers
What are the RISKS during the project construction?
A 16 pile group, consisting of diameter concrete piles, were cast in situ in a clayey soil whose unconfined compressive strength is 1100 psf. Each pile is 60 ft long and the pile spacing is 2.5 times the pile diameter.The water table is at the ground surface and saturated unit weight of the clay is 118 lb/cu.ft. using a factor of safety 3 and a reduction factor =0.45, compute the allowable capacity of the piles acting as individuals
Why concrete barriers have curved surface profiles?
what is anchorage length,lap length and (dont remember the last one)
if mineral admixture add into concrete then what is the differences between full cement concrete & fly ash added concrete of their SP. Gr.?and for the changes of SP. Gr. what is the changes in concrete
Explain the advantages and disadvantages of using plastic and timber fenders?
how to preaper for interview wat they asked in interview give me idea
List out the types of roofs?
a rectangle grill of length 72 inch x 20 inch width.how to calculate bar spacing ,bar consist 8 mm thickness and spacing of bar is 2 inch.. calculate no of bar with formula
How much cement will require for 1Rmt Skirting laying
What is rate for brick masonry work of 1.0 m3 in cm 1:6?
What are the different theories of failure under static load?
strength of bitumen concrete with 80-100 & 60-70 grade bitumen
Define What is the meaning of a blue land surveyors flag?
How did the romans get water up hills using aqua ducts?
