what type circuit breaker is suitable for connecting 1000A load VCb,Mccb?
Answer Posted / aladdin
hi,
i don't know if there is VCB with 1000A rating !
but in ur case you can use MCCB as it achieve your demands
with low price in comparison with ACB that u can use also.
Is This Answer Correct ? | 0 Yes | 4 No |
Post New Answer View All Answers
Why does increasing the magnetic flux in the main field of a d.c motor cause the armature current to reduce??
In the magnetic fluxes, what is the role of armature reaction?
We have drive feeding an output contactor for a 5000 hp motor @ 5kV application. The motor FLA is 629amps x 1.25% service factor = 786.25 amps The cable that we current have in place between the drive and the output contactor is 350kcmil- MV-105 (parallel cables). Per the NEC table 310.60 (C) (69). This show the cable ampacity is at 615 amps per cable for a rating of 1230 amps. We have derated the cable for the cable tray and the multiple cables application and our calculations show that after the correction factor factor we are at 922amps. 1230 amps x .75% correction factor factor = 922.5 amps. The customer is driving us to then use another safety factor of .25% off of the already derated cable. Can you please provide a longhand calculation for your solution on this application?
WHAT IS DOL STARTER? HOW IT WORK? GIVE ITS CONTROL AND POWER DIAGRAM .
How many types are using in 220kv/400 kv swith yard
how could we know the size of cable by physical view?
In a tap changing transformer where is the tap connected, is it connected in the primary side or secondary side?
1.main parts of generator? what is used A-check,B-check,C- check? 2.what is FM200 system in data centers? 3.difference between pac,ahu?
How to test IR testing & magnetic balance test
in ring main system we use the isolater b/w transfer bus and main bus if we r not use isolatar than wat will be the effect in our sys.
What is the armature mmf in a D.C machine?
how is control wiring coding is done in a CRP panel ?
how we sesign the transformer give some specifion regarding design of transformers
Salient pole alternator is more stable, why?
hi frds, i m electrical engineer.can i get cdr for electrical engineer if u have then send me on my mail id its jayesh_ee88@yahoo.com.please help me frds