Answer Posted / swarna prava nayak
pile foundation is a type of foundation which provides a common solution to all difficult foundation site problem.
| Is This Answer Correct ? | 0 Yes | 1 No |
Post New Answer View All Answers
can we make bricks using m10 grade cement concrete and what would be the ratio of raw materials used and price per brick ?
How much cement will require for 1Rmt Skirting laying
in the construction of residential building what type of tank are used?where?why & what is its purpose?
What is the density of DLC & PQC and how it is differ from normal concrete?
The mixture of different ingredients of cement is burnt at?
resins are not soluble in water soluble in spirit used in varnish left behind on evoporation of oil
B.M DIAGRAMS & S.F DIAGRAMS OF CONTINOUS BEAMS
Design a shear wall of length 4.20 m and thickness of 250mm subjected to the following forces.Assume Fck = 25Mpa and Fy = 415Mpa and the wall is a high wall with central part 3440mm x 250mm and two 380mm x 760mm strong bands at each end with following loading. S.No. Loading Axial force Moment Shear 1 DL+LL 1950 600 20 2 Seismic load 250 4800 700
what is escalation?how it is done?
660 square fit two story house make totally how much cement, sant, brick,aggregate, steel totally how much need
For removal of formwork of simply supported slab / beam from where to start the deshuttering? ( Max Bending moment of the simply supported beam is in the center hence is it required to start from the supports?)
What are the advantages and disadvantages of using plastic and timber fenders?
Time required for curing of wall tiles before fixing
Design a cantilever slab to carry a live load of 2000 N/m2. The overhang of the slab is 1.20m. b) A slab over a room is 4.75m x 4.75m. The edges of the slab are simply supported and the corners are not held down. The live load an the slab is 300 Kg/m2. The slab has a bearing of 15cm. On the supporting walls. Design the slab as per Rankine - Grashoff theory. Assume weight of R.C.C. = 2400 Kg/m2.
01. a. Diagram of a slump cone…………… 1 b. Size of Slump Cone…………… 1 c. Volume of a slump cone by av. Dia method…………… 1 d. Volume of a slump cone by av. area method…………… 1 e. Volume of a slump cone by frustrum method …………… 1 f. Angles of slump cone …………… 1 g. Slump measured by slump cone due to…………… 1 h. Slump does not measured by cylinder / cube due to …………… 1 i) ii) i. Slump cone is to be filled in……………………..Layers.
