The synchronous speed of a motor with 6 poles and operating
at 50 Hz frequency is ___.
- 4 Answers
- 9378 Views
- I also Faced
- E-Mail Answers
Answer Posted / sagar
1000rpm
| Is This Answer Correct ? | 6 Yes | 0 No |
Post New Answer View All Answers
If more than rated DC voltage appears across trip coil of the breaker, what will happen? e.g. in 110V DC circuit system, if voltage across battery terminal showing 121 V
Operation carried out in thermal power stations?
What is the instrument to check the rotating diode fuse of alternator in running conditions?
What is the important precuations need tocarried out while working with Electrolite in Battery PM?
Can any one provide the inspection procedure of MIMIC for VFD panel? Details: If someone wants to have a mimic in the VFD panel what are inputs considered for the mimic(like on,off,trip) whether we are able to add speed variation in the mimic(if so how can we get) and what are the parameters to be checked in the MIMIC during inspection?
explain the functions of main isolation switches
Phase control and integral control are used for?
If we have to find the inductance of a dc shunt motor then by giving dc supply or ac supply and what is the reason for it. (this example is from "to determine the transfer function of a dc shunt motor ")
what is interfacing in computer studies?
What is the difference b/w fanuc alpha series 16i and 18i controller. what is stand for i
An 8 pole, 50 Hz, 3-phase IM is loaded to a poing where pull out torque will occur. The rotor resistance per phase is 0.3 ohm and motor stalls at 650 rpm. The rotor reactance at stand still is A 2 ohm B 1.25 ohm C 3.15 ohm D 2.25 ohm
what is the use of surge suppresser in 33 KV incoming panel. where it must be installed,inseries with incoming cable surge suppresser must be at incoming of the breaker are outgoing of the breaker
3 phase induction motor connection star or delta while using ac drive motor is .75 to 5.5 kw
power transmission pole used one support , that only for support or earthing
Dear all, I want to use Induction motor to open and close a 1 ton door. How much power do I need. Thanks
