For Electrical / and Electronic Systems, when we say
efficiency is 80%, then what happens to other 20% from the
Power consumption.? I.e. what happens to this?
- 1 Answers
- 2402 Views
- I also Faced
- E-Mail Answers
Answer Posted / rockyxyz
other 20% is the energy lost to surrounding mainly by
heating. The heating may be due to contact friction,air
friction,hysteresis,conductor losses etc..
| Is This Answer Correct ? | 2 Yes | 0 No |
Post New Answer View All Answers
1.WHAT IS A SMART CAPABLE DB ( DISTRIBUTION BOX) ? 2. HOW TO DECIDE THE TYPE OF DB TO BE USED ( RECESSED/ PLUG TYPE/ SMART ETC ETC? 3. WHAT IS MILLENEUM BUS BAR USED IN DB? 4.DIFFERENTIATE MCCB AND MCB.
What does Bode plot tell you?
What is the complete procedure of erection of electrical panel in industry
What is the lockout relay
How much minimum insulation required between 11kv/3.3kv transformer windings?
What type of core material is used for metering C.T and protection C.T???
explain the process of commutation in a dc machine. Explain what are inter-poles and why they are required in a dc machine.
in ring main system we use the isolater b/w transfer bus and main bus if we r not use isolatar than wat will be the effect in our sys.
why the starting voltage drop in a cable needs to be limited?what is percentage of the voltage drop allowed during starting?
why we used ZNO in Lightning arrester.
in 132kv substation CRT means
in the case of 6.6kv motor starter combination contain fuses on it VCB. but in 11KV motor starter combination Fuses are not using in it's VCB why?
why power factor is important?
What happens if the Capacitive Voltage Transformer Primary neutral is not earthed. There is a CVT between Transformer and source, and the CVT neutral of the transformer is not earthed, does it effect the transformer while charging or does it effect the transformer charging process.
11 kg trivevter meter has rating of -/5amps. And pt ratio11000/110v and is connected with 11kv ct/pt unit of cr ratio 75/5amps. And pt ratio of 11000/110v while checking accuracy of meter with HT Accuchek meter what value of PT ratio and CT ratio to be filled in Accuchek meter
