what IS Code used for TOR & TMT steel bar
Answer Posted / raju
is:2502-1963
Is This Answer Correct ? | 7 Yes | 7 No |
Post New Answer View All Answers
How many hours should traffic be not allowed after completing wbm road or bst.and min how many hours should road rollers be used.
How will be cutting in timber plate size 600*400 column size
How much for the BRC lapping in full yield and half yield < and which table to get it ?
What is specific gravity???
what is box type waterproofing and how it is exsiccated and what is the method of doing box type waterproofing
Can anybody help by describing each and every step in short, used while giving a building layout by total station? Regards
please give me the rates of RCC(CUM), PCC(CUM), Brick Work(CUM), Tile Flooring, Saria Shuttering
How you can use different dimension tools in cad? What are the different dimensions available?
A 16 pile group, consisting of diameter concrete piles, were cast in situ in a clayey soil whose unconfined compressive strength is 1100 psf. Each pile is 60 ft long and the pile spacing is 2.5 times the pile diameter.The water table is at the ground surface and saturated unit weight of the clay is 118 lb/cu.ft. using a factor of safety 3 and a reduction factor =0.45, compute the allowable capacity of the piles acting as individuals
what is the difference between tsp & tower
Before casting a basement roof slab which is connected with retaining wall surcharge load (i.e. sand or earth filling) outside the retaining wall is prohibited because of––
How to arrive dry volume of concrete (1.52 to 1.57) ?
What is meant by dimensioning?
what discoveries did you have in relation to your course?
The building has 12 columns of 12x9 in 3 rows of 4 each in a plot of 50'x30', The central row is strengthened with 16mm twisted rods. The roof area is 1500 sft including balconies. calculate the load factor per sft. Also indicate the number of roofs the building can withstand.