what is CFC logic in communication system? where do we
require this for protection system
- 3 Answers
- 8560 Views
- ABB, I also Faced
- E-Mail Answers
Answer Posted / manish
A novel nonvolatile logic style, called complementary
ferroelectric-capacitor (CFC) logic, is proposed for
low-power logic-in-memory VLSI, in which storage elements
are distributed over the logic-circuit plane. Standby
currents in distributed storage elements can be cut off by
using ferroelectric-based nonvolatile storage elements, and
the standby power dissipation can be greatly reduced. Since
the nonvolatile storage and the switching functions are
merged into ferroelectric capacitors by the capacitive
coupling effect, reduction of active device counts can be
achieved. The use of complementary stored data in coupled
ferroelectric capacitors makes it possible to perform a
switching operation with small degradation of the
nonvolatile charge at a low supply voltage. The restore
operation can be performed by only applying the small bias
across the ferroelectric capacitor, which reduces the
dynamic power dissipation. Applying the proposed circuitry
in a fully parallel 32-bit content-addressable memory
results in about 2/3 dynamic power reduction and 1/7700
static power reduction with chip size of 1/3, compared to a
CMOS implementation using 0.6-μm ferroelectric/CMOS.
| Is This Answer Correct ? | 3 Yes | 1 No |
Post New Answer View All Answers
3 flipflops are connected so that after 0 to 5 count occured next number is zero. So what is the counter?
if UT=4v & V LT=-2v the hysteresis voltage is equal to......?
What is the difference between microprocessor and DSP?
hai i am balaji now i applied for the post of section engineer in rrb chennai............ if any body know the question peper and pattern of written exam please send to me
what is BFU ? what is the working of BFU in BTS?
why can't we share the charging of one phone to another phone? it would be useful during emergency times!! And the mode of sharing should be wireless...
Hello Can any body tell me the list of interview answers asked UMTS Planning and optimazation as i have interview today. Pla mail me on satish_jd2000@yahoo.com its urgent. Thank you
What are the charge carriers in p-type and n-type semiconductors?
Where pll is widely used?
What are the two methods of control in ac voltage controllers?
How output frequency is varied in case of a thyristor?
Is the output power different from input power.? rated input voltage” Is that the voltage we give to the driver or the voltage which comes out from the driver?
Although zener diode is operated in the reverse breakdown region, but it does not burn. Why?
I am stuck up with a question on appending of two arrays
I am writing the code for the same, I am appending two
strings this way
int main()
{
string s1 = "Welcome to C++";
string s2 = "C++ improves the logic ability";
string s3 = s1 + s2;
cout< How much losses in microwave Link?
