what is the specification for silt content in sand
- 8 Answers
- 52853 Views
- I also Faced
- E-Mail Answers
Answer Posted / idrees jae
yeah,i am of the opinion that answers 1 and 2 are correct depending on the perspective.
answer 1,gives you the actual % of silt while answer 2 gives you the worse case.
| Is This Answer Correct ? | 12 Yes | 9 No |
Post New Answer View All Answers
Design a reinforced concrete combined footing (rectangular) for two columns located 3.60 metres apart. The overall sizes of the columns are 40cm x 40cm and 69cm x 60cm and the loads on them are 1000 kn and 1500 kn respectively. The space available for the width of the footing is restricted to 180cm. The S.B.C. of the soil is 280 kn/mm2 use M15 concrete.
How high should the water tank be to provide a 60 psi at base of this water tower?
how to calculate MR 9(derivation)
What is structural frames or systems?
how much tempareture are required to make liquid state of pid leed
Define different types of roof systems?
what is pouring and explain
What are the different theories of failure under static load?
What is .Dwg?
do we decide reinforcement steel , based on bending moment ? give example with continous slab?
Define What is passive earth pressure ?
Under what circumstances should pot bearings be used instead of elastomeric bearings?
Design a shear wall of length 4.20 m and thickness of 250mm subjected to the following forces.Assume Fck = 25Mpa and Fy = 415Mpa and the wall is a high wall with central part 3440mm x 250mm and two 380mm x 760mm strong bands at each end with following loading. S.No. Loading Axial force Moment Shear 1 DL+LL 1950 600 20 2 Seismic load 250 4800 700
What is made from large rocks, which protects the base of cliffs?
Define angular dimension?
