Interested to Buy Any Domain ? << Click Here >> for more details...
why are you use the crgo core lamination in transformer
- 6 Answers
- 9849 Views
- I also Faced
- E-Mail Answers
Answer Posted / ahir ashish
crgo has flux density is good
| Is This Answer Correct ? | 3 Yes | 0 No |
Post New Answer View All Answers
how to maintain frenquncy with syncronising sub-station for distribution
Batteries used for electrical energy storage are a. Laclanche cells b. Edison cells c. Lead acid cells d.any of the above
why is the conservator tank painted white on the transformer
at work i have a genertor/alternater what is the easyest way to work out if it is dc or ac?
How cable from Kit-Kat to main switch, from starter to motor are designed?
what is the transformer turn ratio formula and give some examples?
What is the transfer function?
HELLO EVERYONE, I RECENTLY HAVE FOUND ONE PROBLEM, I WAS TAKING NO LOAD TRIAL OF AN HT MOTOR 920 MOTOR , 1440 RPM , 6.6 KV, WITH AUTO TRANSFORMER. AT 450 V, LOAD WAS 40 AMP AND SPEED WAS 250 RPM. BUT AS WE INCREASE VOLTAGE FROM 450 TO 480V, LOAD BECOME 41 AND SPEED REDUCED TO SOME RPM . SO WHICH PHENOMENON ACTED HERE FOR REDUCING SPEED.?? AND IS IT HAPPENING ALWAYS OR IT IS RARE? I ALSO HAVE FACED SUCH PROBLEM WITH FEW LT MOTOR ALSO.
What are the operation carried out in thermal power station?
which IS or IEC is used for earthing,breakdown voltage of transformer oil, hv/pd testing and all type of electrical testing
How wire size can define in electrical wiring? What is the ratio?
Why earthing is necessary for any equipment?
how can service sitting be setted for MCCB?Example for sittings IR (CURRENT RATING),IS(CURRENT STARTING)IO (current operating
What is the role of Dedicated earthing in UPS System?
I have a relay contact rated at 220v dc which is supplied with a 24vdc from the panel,for it to trip the dampers(24vdc).What if the application of the relay changes so that it should work at its rated 220vdc then will it work at 24vdc supply given or any other consideration needs to be taken .....
