How to convert n/mm2 in to kg/cm2?
Answer Posted / pravin g patil.
1Newton= 0.1019Kg
1N/mm2 = 0.1019Kg/mm2
=(0.1019kgx100)/cm2 ...1cm2= 100mm2
1N/mm2= 10.19kg/cm2.
Is This Answer Correct ? | 14 Yes | 5 No |
Post New Answer View All Answers
what mean By core Billing
The 4 main factors to start a construction project are––
How much area, in square meters, will one liter of paint cover if it is brushed out to uniform thickness of 100 microns?
If specific gravity of cement is less than 3.15 what is the cause?
What is unit weight of normal concrete?
how to calclate the SHUTTERING TAKEN CONCRETE LOAD? WHAT IS THE LOAD BEARING CAPACITY IN STEEL SHUTTERING PLATE? WHAT IS THE CONCRETE LOAD IN (MASS) IN THE SHUTTERING PLATE. PLATE SIZE IS 120CM* 90CM CONCRETE WALL LENGTH IS 10M ,WIDE IS 60CM, HEIGHT IS 1.2M PLS TO SENT THE CALCULATION.
What is the tallest man made structure in the world?
Suppose you planning to paint newly fabricated workshop building made of structural steel of 10 tons total mass. How many litters paint primer for 1 coat and 2 coat of top coat?
How to Rectify deep crack formed on Brick Wall? Explain the method of rectify the defect?
if in column reinforcement lower dia connect to higher dia then from wher we want to start higher dia steel
For 1 bag cement how i will calculate sand and metal aggregate;Here the mix proportion is 1:2.49:2.38
What is the crank length in the slab?
A doubly reinforced concrete beam is 25 cm wide and 50cm deep to the centre of tension reinforcement. The centre of compression is steel is 5cm from the compression edge. The areas of the compression and the tension steel are 10.16cm2 and 12.56 cm2 if m=18 and the bending moment at the section is 7,000,000 N-cm. Calculate the stress in concrete and steel.
Is it worthwhile to carry out tests on particle density of soil particles for geotechnical design?
For elevated service Reservoirs what will be the output of each skilled carpenter and bar bender.