What Should be the rating of transformer used in 33KV
substation?
- 3 Answers
- 14650 Views
- I also Faced
- E-Mail Answers
Answer Posted / rahul m
In a 33/11 Kv substation 2.15 MVA to 10 MVA power
transformers will be used and in 132/33 KV Substations 25
MVA and above will be used
| Is This Answer Correct ? | 26 Yes | 3 No |
Post New Answer View All Answers
Percentage losses in power generation?
What is real time power factor control panel(RTPFC)?
which motor have relatively high power factor and what is reason for have high pf? 1.capacitor run motor 2.shaded pole motor 3.capacitor start motor 4.split phase motor
1. A 380 / 220 V r.m.s. 3-phase 4-wire circuit carries loads of 8 + j8.1 ohm; 4 + j4.1 ohm; and 2 +j2.1 ohmin the three phases respectively. The length of the circuit is 100 m, and the resistivity of the phase conductors is 0.0005 Ω/m. The neutral conductor is of the same size as the phase conductors. a) Select a reference angle 0for the first phase. Then write down the three phase voltages in both polar format and complex number format. b) Make appropriate assumptions, and take temperature effects on resistance is insignificant. Calculate the currents in the three phases. (Note: Determine conductor resistance, and apply Kirchhoff’s Voltage Law) Based on the result, suggest a main switch rating for the circuit. c) Show your preferred direction of neutral current in a diagram, and then determine its value. (Note: Apply superposition principle, and Kirchhoff’s Current Law) Use its magnitude to show that in this circuit, the unbalanced load may increase the voltage drop in some of the phases. (Note: Also observe the common volt drip in neutral) State your assumptions, if there are any. d) Suddenly the neutral wire of the circuit is broken. Estimate the new currents in the first phase, i.e. Phase L1. State your assumptions, if there are any.
How do I calculate/select Droop CT ratio for various capacity of generators?
What do you mean by turns ratio of instrument transformer?
what is the mechanism of operation of brushless dc motor why is it more wexpensive then ordinary permanent magnet motors
How many capacitors using in LT panel as per Govt rules?
What do you mean by transformation ratio of instrument transformer?
Hello seniors m an engineering student in 3rd yr..i want to know what are the software course in electrical field?i wanted to do certification course but i dont know much about the course?..Regards
I Just want do EHS Certified Certification Distance Course From Govt approved,so can any body provide me details.
what is per unit calculation?looking for simple and strong explanation thk u
In dc ckt. 24v or 110v, which one is more efficient and why?
What are the temperature elements?
Why induction motor is widely used in industry
