What is the d/f between DOL & star delta starter & automatic
star delta starter?
- 23 Answers
- 158173 Views
- ACC, Dalkia, Engineering, Indeco, NINL, Novotel, RMH Control Systems, Wipro, I also Faced
- E-Mail Answers
Answer Posted / dhinesh cipet
=>dol starte the motor is directly fed from the line and
=>star delta starter ther motor is started initially from
star and later during running from delta
| Is This Answer Correct ? | 6 Yes | 7 No |
Post New Answer View All Answers
compare between starting charactristics of synchronous motor with those of 3Q Squirrel cage induction motor
i have a 1500kVA transformer what is the kWH meter i need to use?
why motor range is available 22kv,30kv,37kv,45kv and so on? why motor range is not available 21kv,24,25,26,27kv and so on?
Is there chopping current in resistive circuit
what is interpose? where it is used and why it is used?
how 650 volts creates? where is use?
A 100 kVA , 400 v/250 kv testing transformer has 8% leakage reactance and resistance on 100 KVA base . A cable has to be tested at 500 kv using the above transformer as a resonant transformer at 50 hz . if the charging current of the cable at 500 kv is 0.4 A find the series inductance required . Assume 2% resistance for the inductor to be used and the connecting leads . Neglect dielectric loss of hte cable . what will be the input voltage to the transformer ?
what is spadar bar .why I use in DC generator.
Why are cables rated for 40 KA for 0.25 Sec fault current rating?
During Testing of Maintenance Free Earthing, How deep should be the Spikes of Earth Test Meter should be inserted in the soil(one spike is 15 Meter & Other spike is 30 Mtrs away from the Main Earth Electrode. Because, recently, we observed that when spike is inserted 3-4 Inch in the earth- results are better, If spike is inserted 1 feet deep than results are increasing.
If 24 KVA AVR having Input voltage 200-400v, Output voltage 415+-1%, what will be the voltage if Load is 13A.
why -48 volts dc used in telecommucation
Why current shoots up in the secondary on the knee point voltage during saturation test of CT? How core saturation effects the secondary current (while the primary side is open)? What the logic behind this?
What is the different between digital phase converter and ordinary phase converter?
WHAT IS MEANT BY TV TERMINAL IN 500MVA TRANSFORMER?
