Answer Posted / aa
Beam=20mm,
Column=25mm,
fotting=40mm.
| Is This Answer Correct ? | 1 Yes | 12 No |
Post New Answer View All Answers
where will be the reinforcement of slab placed when there is an inverted beam and the bottom of the beam and slab are at same level ?
from one meter cube of stone masonry structure how much cubic meter of cement mortar we use as our estimation 25-30% is that correct for estimation of quantity of sand and cement(2:1) proportion of mortar
Where is the worlds longest elevator and how long is it?
A 16 pile group, consisting of diameter concrete piles, were cast in situ in a clayey soil whose unconfined compressive strength is 1100 psf. Each pile is 60 ft long and the pile spacing is 2.5 times the pile diameter.The water table is at the ground surface and saturated unit weight of the clay is 118 lb/cu.ft. using a factor of safety 3 and a reduction factor =0.45, compute the allowable capacity of the piles acting as individuals
Design a rectangular channel.
sir tell me the formula for calculating the volume of 380mm dia double under reamed pile of 4.0 mts depth.
I have certain queries, please help to solve. a) length of pile bore is 4m.excavation quantity will be area * length where area will be pi/4 * dia*dia. Is this right? b) It is a single reamed pile of 300m dia and reamed dia is 750mm. can any body help me to calculate excavated quantity of this bulb(reamed section),, concrete quantity in bulb with showing the formulas to be used?
What should be the lap length in raft if height of raft is 0.800mm ...it couldn't b 50D or 40D...we just have to join upper and bottom reinforced...is there any formula for determine it...
What is the meaning of Brick- M 35 grade? Is it a common brick or it's a concrete brick?
What is the quantity of cement in mix m20 concrete?
one steel fixers how much ton steel fabrication he will do same how much tone he will binding?
For making a new road in a village having a school & hospital , tell the steps of construction systemically ?
100mm block work 64 bags of cement used 150mm block work 286 bags of cement used 200mm block work 20 bags of cement used patly work (M15) 293 bags of cement used mortar ratio is 1:5 how to calculate volume of sand in cum & no. of bags
which has high compressive strength between hollow block and brick masonry?
Use of coping on terrace wall and in 4" wall is compulsory or not ?
