Interested to Buy Any Domain ? << Click Here >> for more details...
why one pin of plug pin is longer than other two? In some
mobile chargers one pin is made not conducting .Why?
- 4 Answers
- 6715 Views
- I also Faced
- E-Mail Answers
Answer Posted / kaustuv
another reason is that....even by mistake we can't insert d
earth pin into live socket....If for instance the earth pin
comes in contact with the live wire....the metallic or
earthed part of the device is in direct contact with live
wire and we will get an electric shock if we touch the
metal body of the device.
| Is This Answer Correct ? | 6 Yes | 1 No |
Post New Answer View All Answers
Explain thin film resistors and wire-wound resistors
can we use NPT glands in LT panel
What is the difference between earthing,ground&nutral?
how to CHECK CT AND PT AT THE FAULT OCCUR IN GENERATOR RELAY PANEL .
How to select the cable and voltage drop in circuit?
ROC converges if poles and zeros lie inside a. Origion b. Z=1
Why power factor should not be in leading (capacitive) mode of any load.
Why is a plain induction motor unsuitable for wide speed control?
If any HVDC line is going with positive & negative(the negative usually have return path of current with earthing electrode). Now the question is if this HVDC earthed electrode which is using as return path and earthed any nearby 400kv or 220kv AC substation equipments. which will be the impact of this on AC substation & its equipment, how severe may be this and what should be the minimum distance require between HVDC earthed electrode and AC substation equipments? It's really an high engineering level question...Dare to answer and increase your knowledge.
How is the resonant peak, resonant frequency, and bandwidth determined from nichols chart?
While converting delta into star or star into delta ,the three values of resistances remains unchanged .Find out the value?Let In star R1=x;r2=x;R3=x On converting into delta,R12=x;R23=x;R31=x Find the value of x
Thermal withstand capability under full short circuit conditions, in terms of number of times of occurrence of short circuit and corresponding anticipated percentage reduction in transformer life.
While testing LA mast,What are the parameter limits ?
3- What is the target from Zero Impedance, Single Phase Imp., S/C Imp. and magnetic balance tests?
What is difference between slip rings and carbon burushes?
