HOW WE CALCULATE OR FIND OUT THE DEGREE OF FREEDOM IN A
SIMLY SUPPORTED BEAM? IF THERE IS HINGE THEN HOW? & ALSO IN
A PORTAL FRAME? PLEASE GIVE A EXAMPLE FOR EACH QUESTION.
Answer Posted / lili.som835
2j-r
Is This Answer Correct ? | 2 Yes | 4 No |
Post New Answer View All Answers
Currently my house construction is going on but we just realized that the portico earth beam couldn't connect with the original earth because the beam rod not extended so Please advice
Design a shear wall of length 4.20 m and thickness of 250mm subjected to the following forces.Assume Fck = 25Mpa and Fy = 415Mpa and the wall is a high wall with central part 3440mm x 250mm and two 380mm x 760mm strong bands at each end with following loading. S.No. Loading Axial force Moment Shear 1 DL+LL 1950 600 20 2 Seismic load 250 4800 700
What is the quantity of cement used for stone pitching work of 100sqm 225mm thick and cement mortar of 1:6? And how?
what should be the PCC ratio to construct a plinth of (40x40x4)ft...??also its estimated cost??
In the design of bridge arguments what considerations should be made to select the orientation of the wing walls?
Elaborate advantages & disadvantages of using crusher dust instead of sand in rcc work.
How to estabilish reinforcement Steel rolling margin for a building projects ?
Suppose you planning to paint newly fabricated workshop building made of structural steel of 10 tons total mass. How many litters paint primer for 1 coat and 2 coat of top coat?
I am called for interview from north east power plant .so, I need some interview question which may help me.
How to find out kg per Sft ?
Hollow block masonry in cement mortar 1:4, 40×20×20cms in superstructure take 10sqm.I want calculation of brick sand
how to find ssm in foundation?
What was asked in isro civil interview
For what purpose bedding is used under storm water drains, explain?
How to fix toll charge for a particular vehicle at toll booths in a highway?