why table fans rotate clockwise .while ceiling in anti
clockwise?
- 4 Answers
- 14237 Views
- I also Faced
- E-Mail Answers
Answer Posted / viveksekar
tabul fans rotate in anti clockwise directions
becoz............. only on anti clockwise the atmospheric
air can be made to flow down........if it rotate in
clockwise direction then air made flow outward direction tat
the principle used in exhaust
fans;.........................................
celining fans-anti clockwise rotation
exhaust fans-clockwise rotations
| Is This Answer Correct ? | 14 Yes | 14 No |
Post New Answer View All Answers
how generator load test is conducted?what are the steps?
What should be the Sandwitch type Al. bus bar capacity for 2 M.W.Gen. set, having continuous full load current- 3463 Amps,ambient temp.- 50 Deg. C., Required temp. raise-20 deg.C., it will run 24 hrs, 365 days on full load, required highly reliable.
how to identify the cable quality and what is flame proof cable
what is the clear formula to calculate cable size for a load
trasnfarmaer core make
what is the voltage regulation for unity and zero power factor?
Can any body tell me the different types of LT cables & their application.
How the setting of the vector surge relay shall be calculated when the relay is to be used for Grid islanding application?
What are the criteria shall be considers for sizing Fuse and MCB? If the rated current is 10Amps what should be the fuse size / MCB Size?
Application Comparison between 22KV (UE)and 33KV (E) system. Are we allowed to use 33KV (E) cable in lieu of 22KV (UE) cable. What are the technical disadvantages.
During Testing of Maintenance Free Earthing, How deep should be the Spikes of Earth Test Meter should be inserted in the soil(one spike is 15 Meter & Other spike is 30 Mtrs away from the Main Earth Electrode. Because, recently, we observed that when spike is inserted 3-4 Inch in the earth- results are better, If spike is inserted 1 feet deep than results are increasing.
What is referred to the electron in the outer orbit?
given data are load current & power factor cable core size? plz any one update the calculation formula
Why you are switching off arc protection mcb when you are taking shutdown for lv board.
What is the permissible maximum flux density in transformer core?
