Interested to Buy Any Domain ? << Click Here >> for more details...
What valves are fitted in a four-stroke diesel engine?
- 1 Answers
- 3832 Views
- I also Faced
- E-Mail Answers
Answer Posted / tutul
non return v/v, relief v/v.
| Is This Answer Correct ? | 7 Yes | 0 No |
Post New Answer View All Answers
why coposite materials are sronger than solids
Why dtsi is used in motor bikes?
2. Dry saturated steam at 3.5 bar is expanded through a convergent nozzle to 2.2 bar. The exit area is 5 sq. cm. Calculate the exit velocity and mass flow rate, assuming isentropic expansion and super saturated flow. b) A cast iron cylinder head is fastened to a cylinder of 750mm bore with 12 stud bolts. The maximum pressure inside the cylinder is 3 Mpa. The stiffness of part is thrice the stiffness of the bolt. What should be the initial tightening load so that the point is leak proof at maximum pressure? Also choose a suitable bolt for the above application 2 The propeller shaft of a marine engine is to transmit 600 kW at 1200 rpm, without a significant bending. The efficiency of the propeller is 88% at 32 knots ( 1 knot = 1085 km/hr). If the slenderness ratio is less than 50 and the permissible shear stress should not exceed 65 Mpa. Determine the diameter of shaft. 3 A semi-elliptic leaf spring consists of two extra full-length leaves and six graduated length leaves, including the master leaf. Each leaf is 7.2 mm thick and 65 mm wide. The centre-to-centre distance between the two eyes is 1.3m. The leaves are pre-stressed in such a way that when the load is maximum, stress induced in all leaves are equal to 380 N/mm sq. Determine the maximum force that the spring can withstand
What are the safety devices of boiler?
What is the purpose of increasing the pressure on the F.O. system of the engine?
What is raito of coolent level in DG
How to prevent back fire of boiler?
Hindustan petroleum placement papers.please send me.
How much of MSW waste is to feed to produce 1MW ?
What is the use of try square?
Draw a crankshaft and show the parts?
What do you understand by catenary cable ?
What causes white smoke in two stroke locomotive engines?
What are the items to inspect after cylinder liner is pulled out
What are the advantage and disadvantage of using lpg in a car?
