What fluid first to be lined up in a heat exchanger whether
hot or liquid?why?
- 2 Answers
- 5170 Views
- TCL, I also Faced
- E-Mail Answers
Answer Posted / narendra
cold fluid stream is to be lined up first.if hot fluid is
lined up first ,it will not get cooled at all,For few
minutes till cold fluid is lined up and full flow is
attained.Tube expansion or leackage can also occur due to
on sided heating.
| Is This Answer Correct ? | 2 Yes | 0 No |
Post New Answer View All Answers
Given, T1=600C, constant temperature of wall 800 , length of wit exchanger L=3m, dia=25 mm, Cp=14.91 KJ/kg.K, density ρ=914 kg/m3,mean velocity vm= 2 m/s, film heat transfer coefficient hf=72 Kcal/h.m2.K, what is the outlet temperature?
What is a good source of information for the design of pressure vessels?
what is defferance between tubular & automotive plate battery
What are demand of crotonaldehyde99% in the worldand its international market ?
Mention some of the specialized grinding and crushing methods.
Hi, This is Naveen, plz if anybody have experience of IOCL interview, send me question.
Re: Sugar Cane Bagasse What are the 1. Specific Heat of Bagasse at 50% moisture, 40% moisture and 25% moisture? 2. What is bu;lk density of bagasse at 50% moisture, 40% moisture and 25% moisture? 3. What is specific gravity of bagasse at 50% moisture, 40% moisture and 25% moisture? 4. What is the specific heat of flue gases generated from boiler fuelled by bagasse? 5. What is the specific gravity of flue gases generated from boiler fuelled by bagasse?
Mention some of the specialized crushing methods?
What are some common precipitating agents used to remove metals from aqueous waste streams?
What is the significance of the minimum flow required by a pump?
What are some common problems associated with dilute phase pneumatic conveying?
What are pcbs?
What are some characteristics of bulk solids that can affect their ability to flow properly?
Explain the difference between cfm (cubic feet per minute) and scfm (standard cubic feet per minute)?
What is the easiest way to extract hydrogen from water and the safest way to store it?
