Interested to Buy Any Domain ? << Click Here >> for more details...
why are laminations used in constructing the field core?
- 3 Answers
- 7936 Views
- I also Faced
- E-Mail Answers
Answer Posted / dharmesh
to reduce iron losses.
| Is This Answer Correct ? | 4 Yes | 3 No |
Post New Answer View All Answers
plz tell me,ht and lt panel terminals in substations explain beiefly
what is the chemical name and formula of refrigarent R-134a.
What is knee point voltage of transformer?
how a.c. genarator control power factor when its conected to grid supply by incrising or decresing excitation voltage.
why we need to us lenz's law for synchornous motor
Application Comparison between 22KV (UE)and 33KV (E) system. Are we allowed to use 33KV (E) cable in lieu of 22KV (UE) cable. What are the technical disadvantages.
Why phase sequence must be same in any ht motor or generator circuit?if phase sequence doesn't same whatever will be affect on circuit?
I have 1500/1A CT If i connect this CT in 6.6KV bus bar means what will be the voltage present in CT?
What is the operating principle of turbo-generator.
DESCRIBEPNEUMATIC SYSTM OF ASH HANDLING PLANT
May I know how much values to be set for earth fault, over current and short circuit values at 11kv side? I have 11kv van 1250amps rating. Present it's taking load 80amps?
in control panel, how can i measuring the distance between one bus bar to another bus bar. then now only for bus bar. in mpcb and contactor also. that means one mpcb to another mpcb how much distance? how can i calculate that.
what would happen if reactive power (kvar)is increased (more)or decreased (less)? how much exact reactive power should be maintained? and what should be done for that
Pls mail me utility & Dg related question with answer
My question is whether bellow formula is correct to find bus size for 46kA for 0.5 second & what is RT in bellow formula. formula to calculate the size of busbar to withstand the thermal stresses due to currents with duration of 0.2 sec to 5 sec. Sp = RT( I x I x t) / K Where Sp – is the cross sectional area of bus bar in millimeters. I - is the value of AC fault current. t - is the operating time of disconnecting device in seconds. K – is the factor depending on the material of the conductor, insulation and initial and final temperature. Value of ‘k’ for copper is 143.
