Interested to Buy Any Domain ? << Click Here >> for more details...
What should be value of Circuit breaker operating time and
tripping time?
- 5 Answers
- 15091 Views
- I also Faced
- E-Mail Answers
Answer Posted / arun
Circuit breaker closing tome 60 msec
triping time lessthan 40msec
| Is This Answer Correct ? | 8 Yes | 9 No |
Post New Answer View All Answers
Two bulbs of 100w and 40w respectively connected in series across a 230v supply which bulb will glow bright and why?
Please clarify, 1. Is it required to lay two runs of GI wire along with Armoured LT cable if it is laid between one big mains (63Amps TPN SDF) to small main (32A TPN SDF) with proper glanding termination? 2. If the armoured cable with proper glanding is laid from DB to CNC machine, is it required to run two runs of body earthing to the Machine from DB? 3.If the armoured cable with proper glanding is laid from Substation to Hangar, distance is approx. 100 mtrs, is it required to do earthing at shop area though the primary termination at substation is earthed through gland.
WHAT CAUSED THRESHOLD VOLTAGE TO EXIST?
What is transformation ratio what it describes?
Can anyone tell the proper diagram of star delta starter????
what is the necessity of under ground cables ??
my b-tech percentage is 50%. what answer will satisfy the hr ?
what is smartµ grid technology?under coal gassification?
I HAVE A 50A MCCB AS PER DESIGN LINE WIRE CONNECT UPWORD SIDE AND LOAD IS CONNECTED TO DOWNWARD SIDE TO THE MCCB.IF NOW ANY ONE CHANGE SUPPLY & LOAD(WISEVERSA) WHAT HAPPENS ? DOES MCCB OPERATION OR WORKING FUNCTION NORMAL IF YES THAN WHY THERE ARE MARKED LINE & LOAD ON MCCB.
am commissioning the trafo without connecting the neutral therefore unbalance will occur what is the alternative solution for this?
what is d check in dg 1500kva
what is a bus riser in power system and why it is used
What should be the percentage increase in length of the dead end clamp for bus bar conductor (Hawthorn) after hydraulic pressing and what should be the applied pressure?
Difference between Earthing Truck & Earthing trolly for HT panel
Why to keep capacitor bank off while generator running.
