Answer Posted / jitendera kumar sinha

ok
thanks for the complement that my answers are easy to
understandble

now comes on topic subnating
brekaing a single network in to the multiple subnetwork is
called subnating
sub+nat+doing=subnating(trick for rember the diffination)
why we need it-
in that decade where all the industry and corporte are
being comptrized but for the comunicatin on the n/w channel
it is nessry that all ip address should be unique so
maintain the uniquecity of that ip address subnating is
used
this is the technical explanation if some one say that
scince ip addres is not enough so to preserve the ip
address we did subntaing this is also wright but not a good
approch
this is all about theroytical consepts of sunating
now how we done it

here it is(i am reqesting you to write it some where becoz
it is the back bone of networking)

now as you know that threr are classes of ip address

as class a range of class a 1---126 mask 255.0.0.0

class b range of class b 128--191 amsk 255.255.0.0

class c range of class c 192--223 mask 255.255.255.0

class d range of class d 224-255 mask 255.255.255.255

class e range of class e
here some point you should remebr
1 in class a i didnot define 0 and 127 because 0 is resved
for default root (you will read it in routing protocol)amd
127 is reseved for loop back(familar with 127.0.0.1 for
checking nic card stautush wright if not then try it to cmd
promt )
2 network 224 - 239 resved for multicasting and class e 240-
255 for some defence uses
so not be confused becoz network 224 to 255 are reseved for
class d and class e addresss

now let start subnating with class c adress

class c address
in that adress 3 octet are for the networking and 1 octet
for host
that is
class c N|N|N|H
each n/w bit represnted by N
and host bit by H(plz keep in mind/i will use it in that
whole article)
ok each network bit coantin 8 bit
and each host bit conatin 8 bit
then if threr is ip asrees 192.168.10.12 then what should
be mask
answer is 24
now question is what is mask
mask is used to identyfing that from which class ip address
so come to th point
ip address=192.168.10.12/24
now why 24?
becoz in class c ip address there are 3 octet for network
of size 8 bit then 8*3=24.so what did you notice that for
identyfing the ip address class we see the only value of
first octet only first (remeber)

so in the subnating we answered folowing question
1 how many subnet does the chosen subnet mask produse
2 how many vallid host per sunet are avilable
3 what are the brodcast address of each subnet
4 whta are the valid host in each sunet
5 what are the valid sunet

befor doing sunating these two equation must be rembred
that is
2^n-2=for total nuber of network n=network bit
2^h-2=for total number of host bit h=avilable host bit
why -2(becoz cisco not recomnded it as a valid n/w and host)

let understand by an exapmle
192.168.10.0/26

ok what should be original mask for that address
answer is
192.168.10.0/24 but given mask is 26 that is we need 2 bit
extera from where we get it
we get it from hot bit becoz it has 8 bit for host
now we borrow 2 bit from host then remnaig bit are 6
so how many n/w soory vallid network =2^2-2=2
and what is the nimber of valid host=2^6-2=62 host per sunet
now what should be mask of that given ip address
herer it is scince we borrow two bit from host for n/w then
128 64 32 16 8 4 2 1 (what is this?=this is some thing to
convert any decimal value to binary in eifght add all u get
255)
again i wrote 128 64 32 16 8 4 2 1
1 1 0 0 0 0 0 0
two bit is taking for sunating so i amrk two bit as one and
rest are as 0
so add this two bit marken by 1
128+64=192
then mask of that given ip will be
255.255.255.192/26(see that mask i decriebed)
so what should be block size
tha is 256-192=64
that is subnated ip address is
192.168.10.0 192.168.10.63 192.168.10.127 10.191
----------- ------------ ---------- ------
----------- ------------ --------- ------
192.168.10.63 192.168.10.126 192.168.10.190 10.255

what is n/w id=first ip address is always known as n/w id
what is broadcast id=last ip address is broad cast id
for given ip 192.168.10.12/26 what is the n/w id and broad
cast id
answer os n/w id 192.168.10.0
broad cast id 192.168.10.63
simalry for192.168.10.92 what is the n/w id and broadcast
id
answer is 192.168.10.64(n/w id)
192.168.10.126(brad cstid)
ok here cisco let the invalid ip the first one and last one
that is
192.168.10.0---------192.168.10.63
192.168.10.191 -----192.168.10.255
valid host
the ip address between the n/w id and host id
so herer is your task
in need reply
wsunat that ip address
192.168.56.64/27
and answer all short of thing

after that i will go to next section

What is difference between flsm and vlsm?

699

---

Define network congestion?

650

---

Define the igp (interior gateway protocol)?

636

---

Mention what does the clock rate do?

736

---

Name the command we give on privilege mode for coming back to user execution mode?

610

---

---

Explain how many types of ends in wan?

644

---

What is the difference between bus topology and hub?

662

---

What are the advantages of lan switching?

611

---

Define network?

819

---

What metric does rip use? How is the metric used to indicate an unreachable network?

806

---

What are the advantages of a layered model in the networking industry?

693

---

Which type of routing you did in ccna?

682

---

What is HDLC?

700

---

How many fillers we can put in one ip of ipv6?

661

---

What is DHCP stand for?

703

---