Interested to Buy Any Domain ? << Click Here >> for more details...
What is basic difference between Soft Starters And VFD
drives?
- 19 Answers
- 51957 Views
- IBM, I also Faced
- E-Mail Answers
Answer Posted / n.satheesh kumar
By using Soft-Starter to limit or control the starting
currentsource current of the motor.And it provides the
smooth starting for the motor.But in VFD is depending upon
the frequency.
| Is This Answer Correct ? | 11 Yes | 2 No |
Post New Answer View All Answers
why u r living from presentaly working.
Explain the operation carried out in thermal power stations?
how freewheeling diode improves the powerfactor
WHAT R THE SAFETIES IN A HIGH TENSION PANEL N LOW TENSION PANEL. ALSO WAT SAFETIES R THERE IN A 200 KVA TRANSFORMER?
why Current is lead 90 degree and voltage is lag 90 degree in a capacitor.? why Current is lag 90 degree and voltage is lead 90 degree in an inductor.?
in general it is observed in power stations, the tertiary winding is used in higher rating Y-Y auto transformer but not in Y-Y power transformer. is the tertiary winding is compulsory then why it is not using in power transformerÂ
why motor range is available 22kv,30kv,37kv,45kv and so on? why motor range is not available 21kv,24,25,26,27kv and so on?
What is the previous name of Cox's Bazar
How to find out damper winding failure for synchronous machine?
A 15 kw squirrel cage motor having a maximum efficiency of 90% on a continuous full load has temperature rise of 42 degrees celcius after 30 min and 52 degrees celcius after 1 hr under the above operation conditions. a) calculate its final steady state temperature rise on continuous load and the heating time constatnt. b) if the motor is operated on a short load for 9 min estimate its temperature rise. c) calculate the maximum overload that can be applied on a short, 9 min rating so that the temperature rise is the same as the final steady state temperature rise on continuous load.
What is thresh hold value of current?
whether starting current is limited to rated current of motor through soft starting or it exceeds the rated current?
How can we measure the residual voltage in dc machines?
Plz tell me how we can find that particular company has vacancy or not
HOW DO I CALCULATE THE SETTINGS FOR THE DIFFERENTIAL PROTECTION OF A 12kV/6.6kV, 6MVA,DYN11 XMER WITH PRIMARY SIDE CTR 400/1 AND SEC SIDE CTR 600/1?
