wat s the difference between diode and capacitor
- 20 Answers
- 25097 Views
- TCS, I also Faced
- E-Mail Answers
Answer Posted / zubenathi siganga
DIODE IS A SEMICONDUCTOR WHICH IS US TO CONVERT AC TO
PULSUTING DC AND USED FOR RECTIFICATION WHILE CAPACITOR
STORES ENERGY
| Is This Answer Correct ? | 18 Yes | 2 No |
Post New Answer View All Answers
what is the Earth Voltages in Power Plants, Sub-stations, Industries, Residential & Commercial Buildings.
What is oscillator circuit?
What is stepper motor?
HOW WE KNOW IN PHYSICALLY THE CONTACT SURFACE OF A VACUUM INTERRUPTER IS GOOD OR GOING TO DAMAGE IN A VCB AFTER ABOVE 500 TIMES OPERATED.
Why the efficiency of generator is more than motor in swinburne's test
In convertor can we use rectifier thyristor in place of invertor thyristor with explain.
HI....HOW CAN BE MESARED THE VALVE OF NEUTRAL GROUND RESISTOR WHIC IS LOCATED AT SWICHGEAR ON GENERATOR SIDE....
State and define ohm’s law?
Why syn. Generators are used for the production of electricity?
how can maintaince the acb contactor moveing and fixing kit
in dc series motor if field wdg is shorted then
all interview questions with answers of ntpc (2000-2009
A commercial Building is designed with 14th floor levels with indoor substation of three phase transformer with rated capacity of 1000 Kva.The transformer delivered 65% of its rated capacity at 0.67 power factor lagging.Because of low power factor, the power customer was penalized and certain cost was charged accordingly based on every point percentage lower than 85%.This situation may repeatedly happen on the succeding energy bills of power customer.The power customer is desired to improve its historical power factor of 0.67 lagging and no further penalty be impose by the local power company on the next bill. Q: Identify the appropriate solution you want to offer to Client?.Justify SCIENTIFICALLY and MATHEMATICALLY the principles behind the solution.
features of hbc fuses
An 8 pole, 50 Hz, 3-phase IM is loaded to a poing where pull out torque will occur. The rotor resistance per phase is 0.3 ohm and motor stalls at 650 rpm. The slip when motor stalls is A 1 B 0 C 13.33% D 10.33%
