Interested to Buy Any Domain ? << Click Here >> for more details...
What are methods to avoid the inrush current at the time of
starting of power transformer ?
- 8 Answers
- 13966 Views
- Wipro, I also Faced
- E-Mail Answers
Answer Posted / vijay
apply a coil before applicable circuit
| Is This Answer Correct ? | 3 Yes | 7 No |
Post New Answer View All Answers
along with technical test papers
Practical condition in 400KV Sub station:- Breaker(open) , isolator(open), Earthing (close) at both end e.g A & B. Now Open A Stn Earthing than Open B stn Earthing (Which have a 50MVA reactor) , AND suddenly show R,Y,B phase 704KV,573KV,118KV respectively. Que is without closing of breaker how it is possible.???? My Whats app No:07621840498 for Further Discussion. Pls experts suggest.
what is the internal working of star delta starter
Explain how to determine capacitor tolerance codes?
On what cycle does thermal power plant operate?
defination of controlled shunt reactor
Please help me regarding my one concern. - During earth pit testing we noticed that the Clean earth pit and dirty earth pit showing continuity (Resistance value - 5ohm) . I want to know that if both earth pit have separate location and there is not internal looping between PIT then why such continuity is showing on it . Because of this issue the field side all earthing point showing short. In PLC panel we are providing two types of earthing cable which is coming from separate earth pit (Clean and Dirty earth pit) because of earth PIT showing short our PLC is not complying spec . please help regarding this issues.
what is there inside an inverter and how it works?
can i connect the two phases of scott connected transformer,if not why?
What is Long rod insulator and it's applications..? merits over the disc insulator ..?
with 3 phase board on a 63 amp rcd is it ok to have 6 electrical showers 2 on each phase and what problems could happen
As we know diode work on both negative and positive but converting ac into DC we have to given a/c from negative of diode or positive side.please give me answer.
What is the selection process of breakers. Can any one please give a formulation on same?
why we used dc supply for field in dg set
can any tell me why slope 40% and 80% is calculated in differential protection?
