Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / mahesh.s
Selection of circuit breaker mainly depends on the voltage
capacity for which its is connected in the circuit like
3.3kv,6.6kv,11kv,33kv,...etc and the breaking capacity of
that breaker means at wht current it will trip the ckt...
and making capacity,
Thermal capacity,
application like indoor or outdoor usage.
| Is This Answer Correct ? | 32 Yes | 19 No |
Post New Answer View All Answers
Why field rheostat is kept in minimum position while armature rheostat at maximum position?
what is the significance of terminal voltage and phase sequence in the operation of paralleling of two generators?
1. What is maximum permissible distance between smoke detectors ? 2. How do we decide number of smoke detectors required in a large office, warehouse, hall etc ? 3. What should be maximum height of smoke detectors ? 4. Where do we use heat detector, optical smoke detector, temperature sensitive detector ?
Is Transol transformer oil comparable to nynas nytro libra?
If the line voltage is reduced to 75% of its rated value then by what percentage current will reduce ?? 75% 25% 50% no change and why ?
how give earthing conection to household equipment?
How to connect the chemical earthing and complete process tell me plz
what is meant by motor startup supervision & motor load jam protection ?
EHV current carrying parts need to have smooth finish,then how can a 245kv GIS with emery finish can run so long?
What si the d/f b/w KVA & KWH, kvarh & kvar, kwh & kvar phase voltage & line voltage
What are the advantages of stationary armature and rotating field system?
role of europe union in UK safety legistlation (electrical safety)
What is VSCF windelectrical system?
Why arc quenching is used in Diode ?
in the directional overcurrent and earthfault protection,normally we are setting the angle 45 deg lead for phase fault overcurrent and -45 deg lead for earthfault fro forward direction.but both the fault are operating on the same angle region only.why?how the relay will response?
