Answer Posted / ram_svepl
ELECTRICAL IS THE STUDY OF FLOW OF ELECTRONS THROUGH
CONDUCTORS LIKE CU,AL AND THE DETAILED ANALYSIS OF
GENERATION,TRANSMISSION,UTILISATION AND CONSERVATION OF
ELECTRICAL POWER.
| Is This Answer Correct ? | 9 Yes | 11 No |
Post New Answer View All Answers
how we select ac fuse rating of an power inverter???
sourse is 66 KV / 350 MVA, transfarmer is 1000 KVA 6.6 / 0.415 kv, iF fault is 28.75 MVA on 0.415 KV Bus then calculat the Transfarmer Impidance
What is the need of earthing transformer for delta side of a transformer. (Think of a line section between a star/delta transformer at a grid substation and delta/star transformer at a village. An earthing transformer is there at the delta side of the star/delta transformer at grid substation). As there are no ground reference there will not be fault current if a one phase is grounded. Further L-L phase will be sensed by the primary side of star/delta transformer as a L-G fault. So why an earthing transformer is required at delta side
Is it required to lay 2 runs of GI wires along with armoured cables from one power DB Machines of higher rating?
Earth bits close or open. Which is correct
what are the advantages and disadvantages of speed control of 3 phase induction motor by varying frequency explain with drawing
explain which quantities change in the starting and the and the running condition in induction motor
Why we use circular(Stepped) cross section in transformer core?
What effect does a very low impedance have on the Voltage regulation? On the short-circuit current?
design a 3 bit synchronous and asynchronous counter using T- flipflop
How to calculate VCB rating for 33KV ,25 MW Power line?
Why do we pefer VCB over OCB?What are the advantages of VCB over OCB?
how to calculate percentage impedence at 75 deg C at normal tap
Explain the terms real power, apparent power and reactive power for ac circuits and also the units used.
What are your future plans for the company if permanently employed?